Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Steel Racking
Any good software out there for designing and testing steel racking?
i need to build a 3 shelf rack that will hold about 1500lbs per shelf overall 100"x24" I would like to have it all open except for the side frames. there will be a load of 750 lbs on the right and 75lbs on the left of each shelf... any ideas? was thinking 2"x2" .110 for the frames and 2x4 for the beams .110 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
OT - Global Warming Revisited | Metalworking | |||
1018 Steel Elongation | Metalworking | |||
FAQ: HAND TOOLS (Repost) | Woodworking | |||
What oil do I use to 'Temper' steel? | Metalworking | |||
Plastering onto steel | UK diy |