 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
switch to grease?
We are running a boye' & Emmes 18 inch engine lathe. Currently we are
lubricating the main shaft with drip feed oil resevoirs even at a slow rate and with 680 iso semi synthetic oil it leaks out of the bearings dripping oil all over the machine and the surrounding floor. We are wondering if we should switch to automatic grease feed cups with some sort of synthetic grease so as to stem off the lubricating leaks. Thanks in advance. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Switch wiring question | UK diy | |||
| Cleaning electrical switch. | Home Repair | |||
| Double-pole single toggle switch vs. 3-way switch? | Home Repair | |||
| help selecting a manual transfer switch | Home Repair | |||
| Problem with replacing a bathroom light switch | Home Repair | |||
Linear Mode
