 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
2:1 gear box ?
I have a right angle gear box with 1" shafts which I am using to make a
firewood saw bench which will run off the PTO of my tractor. The gear box is a 2:1 ration. 2 pinion turns = 1 ring gear turn. Can I use this the opposite way and put power into the ring gear shaft and run my saw pulleys off of the pinion gear shaft. Can these gearboxes be used either way or does the power have to enter through the pinion gear? Thanks |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Gear wear on my lathe | Metalworking | |||
| Gear wear on my lathe | Metalworking | |||
| uh, oh -- post drill gear problem | Metalworking | |||
| Gear cutting...am I crazy? (long) | Metalworking | |||
| Help a newbie out? | Metalworking | |||
Threaded Mode
