Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Miniature screw assortment?
Lately I seem to be wishing for itty-bitty screws. I googled around and
found suppliers and cool charts but it looks like $0.12 ea. in 100 qtys. for one size. I have yet to find an assortment. I haven't found taps cheap either. There's probably a big bunch of tips about handling miniatures and just how are threaded holes measured? And do you use an ittsy- bittsy thread gauge? ...and I have trouble with #4s... |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
finishing ends on a lead screw | Metalworking | |||
Briggs & Stratton 3.5hp running too rich? (Cutting out) | UK diy | |||
Briggs & Stratton 3.5hp running too rich? (Cutting out) | Home Repair | |||
Just talking about mains tester screw drivers | UK diy | |||
Home Depot not for Do-It-Yourself'ers? | Home Repair |