Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Long arbors for van norman no 12
I just picked up a van norman no 12, and it doesn't have any arbor to
use for over arm support, it has some small arbors and such, but that is it. I know people have made some on there own, can someone explain the process? Are you actually cutting the taper to slip into the spindle or can you just make one in like 1/2 inch and use a collet and the other end supported by the overarm? Appreciate any help. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Coving long lengths? | UK diy | |||
Silent thermostat | UK diy | |||
Long post about boilers and stuff - with too many questions....! | UK diy | |||
OT Cheap long distance rec. | Metalworking | |||
Van Norman literature available | Metalworking |