Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
SL parts wanted
Hi Can anybody help me with any of thees parts for a Unimat SL
Tailstock ,vertical column, bracket to fit headstock to column, drive pulley on the end of the headstock, or if you have a part or complete lathe any condition, 12x1 mm tap lathe manual and headstock hand feed lever. l am in the UK. Ken |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
SL parts wanted
Hi Can anybody help me with any of thees parts for a Unimat SL
Tailstock ,vertical column, bracket to fit headstock to column, drive pulley on the end of the headstock, or if you have a part or complete lathe any condition, 12x1 mm tap lathe manual and headstock hand feed lever. l am in the UK. Ken Probably your best bet is to watch eBay for the parts you need. Not cheap but those parts are never cheap. http://search.ebay.com/unimat_W0QQfromZR40 Best Regards, Keith Marshall "I'm not grown up enough to be so old!" |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
SL parts wanted
On 10-Dec-05 6:27 AM, Kenneth Widdall wrote:
Hi Can anybody help me with any of thees parts for a Unimat SL Tailstock ,vertical column, bracket to fit headstock to column, drive pulley on the end of the headstock, or if you have a part or complete lathe any condition, 12x1 mm tap lathe manual and headstock hand feed lever. l am in the UK. Ken Have you tried the Unimat group on Yahoo? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
WANTED: NIKKO RECEIVER FOR PARTS | Electronics Repair | |||
Heads up on service manuals! | Electronics Repair | |||
Parts or broken rigs wanted | Electronics Repair | |||
cleaning parts after tumbling | Metalworking |