Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Bob
 
Posts: n/a
Default OT Steel post and water pipe

My brother in Fortuna, CA, sent me this message last night, I thought
others might enjoy it.
Bob Meade


It is windy and raining...........the cement deer blow over last
night...this morning I drove a steel fence post down
to act as a support so it would never blow over again...........I
noticed water coming up,,,,,,,,,yes
I hit the main water line to the house............now try and remove
that steel post ..it does not want to come up............finally I get
it removed...............than dig a great hole to get to the
pipe...........which
I had cut in half, shattering the ends............go to Wyckoff"s
plumbing store.........get a repair kit..........lay on my belly
and install the repair...........of course it leaks.........reinstall
and it holds.........turn on the water
so Alma can shower as she has a dentist appointment...........the
water system plugs up
from dirt and the volcanic rock from the ground cover that had made
its way into the one and one fourth inch
plastic pipe..........all this and it is still blowing and
raining...........I am cold and wet and ****ed off, but at least it
is not snowing........but feels cold enough too...........and it is
now four o'clock.........I give up call
the plumber from Denny Wendt's and he
will be here in the morning..........as you might know**, all pipes
under the house are copper and each joint is soldered.............What
a day..........and it started out with a simple job of putting in a
steel support post ..........to hold up the deer statue.........I
know the plumbing bill will be rough...........but I will pay
it............gladly
JMM
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Leak in hot water tank Johnny UK diy 9 April 9th 04 07:28 PM
Printer Reestit Mutton UK diy 16 October 31st 03 10:06 AM
Further to my last post entitled 'Flushing and treating central heating question' David W.E. Roberts UK diy 0 July 29th 03 07:15 PM
Knife Steel FAQ updated Gunner Metalworking 9 June 26th 03 11:11 PM


All times are GMT +1. The time now is 04:45 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"