Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
William B Noble (don't reply to this address)
 
Posts: n/a
Default FA: a couple of more goodies

still clearing stuff I don't need out - I've listed an Omron
temperature controller - the particular model is discontinued, so I
suppose if you have machinery that uses it having a spare could be
quite helpful.
(here's the link)
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MESE:IT

and I relisted the traser watch - the first buyer didn't go through
with the deal - this would be really cool for one of you guys who
works with small stuff - the illumination in this watch is made via
small glass vials coated on the inside with a phosphor and filled with
tritium. So they don't need to be "charged" with sunlight to glow -
they are not as bright as new, but still very bright compared to
anything else I've seen - so you could use the hands on a different
watch, and use the hour markers in jewelery or something - or maybe
you can get the watch to work, or fix it, or ???

anyway, here's the link
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=5062674489
Bill

www.wbnoble.com

to contact me, do not reply to this message,
instead correct this address and use it

will iam_ b_ No ble at msn daught com
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Couple of questions on applying / removing silicone Steven Campbell UK diy 4 September 29th 05 06:45 PM
Heat exchanger woes - a couple of questions Hugo Nebula UK diy 6 September 20th 05 10:29 PM
Under Sink Heaters a couple of quick questions.... Adam Aglionby UK diy 5 July 16th 04 06:36 PM
First project pics and a couple of questions chem Metalworking 10 October 19th 03 10:50 PM
SEASONS GREETINGS BLOCKS Jack-of-all-trades - JOAT Woodworking 2 September 8th 03 05:06 PM


All times are GMT +1. The time now is 05:47 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"