Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Making a perfect snow shovel
"Ignoramus8020" wrote in message
... I recall seeing professional snow shovels, that were I think made of some nice aluminum, with almost straight blades, that worked great. Made for large apartment building owners. I do not mean the crap that they sell in stores these days, either trashy plastic or very thin aluminum. These do not stand up to a man shoveling large amount of snow. I would really like to buy a sheet of suitable metal and make a most perfect snow shovel, that would be usable forever. Any suggestions as to what gade, thickness etc of what metal to buy? I do not mind regular carbon steel, as well. What I do not want is a shovel that would be either too heavy, or would bend when it hits some object, and does not crack from long term use. i In my humble opinion the Yo-ho steel pusher shovels kick but for general use. When you need to do some serious shoveling I also use an aluminum scoop shovel farmer use for moving grain. Both are partially shown on this page, upper right is the grain scoop, lower right is the pusher. http://www.yo-ho.com/ I just retired my first Yo-ho pusher I bought back in '81. I replaced it with the same. The old one's blade was worn to about 1/2 of new! When they both fail me I get out my 10 HP Toro! Greg |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Snow Blower - Made in China | Home Repair | |||
Snow throwers - plastic impeller ok? and other questions (LONG) | Home Ownership | |||
Making Trim? | Woodworking | |||
Making a ruin into something habitable. | UK diy |