Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Carolina Horizontal Bandsaw
Hi Folks! I wonder if anyone knows whether or not the Carolina Tool and
Equipment company still does business? I have one of their horizontal bandsaws and am in need of a few replacement bits such as the 12" dia. cast iron "bottom" or drive wheel and both the blade guides. I suppose that I could cast these both and machine them but I'd really rather not if I can get hold of the real thing. Thanks in advance! Tinker |
#2
|
|||
|
|||
Carolina Horizontal Bandsaw
The number I have for Carolina or Ramco is 1-800-845-4141. It worked last
summer when I priced the idler wheel on my Ramco RS90 bandsaw. Steve "Misty & Sean Foley" wrote in message .. . Hi Folks! I wonder if anyone knows whether or not the Carolina Tool and Equipment company still does business? I have one of their horizontal bandsaws and am in need of a few replacement bits such as the 12" dia. cast iron "bottom" or drive wheel and both the blade guides. I suppose that I could cast these both and machine them but I'd really rather not if I can get hold of the real thing. Thanks in advance! Tinker |
#3
|
|||
|
|||
Carolina Horizontal Bandsaw
Steve,
Many thanks for the response! I tried the two 1 800 numbers listed in the upper wheel cover of the saw but neither one worked, one was the 4141 number you provided. But!... I didn't know that there was also another name to chase down "Ramco" I'll start with a google search on that right away! Thanks again, Tinker |
#4
|
|||
|
|||
Carolina Horizontal Bandsaw
"Misty & Sean Foley" wrote in message ...
Steve, Many thanks for the response! I tried the two 1 800 numbers listed in the upper wheel cover of the saw but neither one worked, one was the 4141 number you provided. But!... I didn't know that there was also another name to chase down "Ramco" I'll start with a google search on that right away! Thanks again, Tinker http://www.carolinaequipment.com/ -Steve |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Moving A Large Bandsaw | Metalworking | |||
Carolina HV20 Horizontal Band Saw | Metalworking |