Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Chopsaw blade on a tablesaw?
I need to cut a lot of 16 ga., and so thought I would put the tablesaw to
work with a chopsaw blade. It didn't seem such an awful idea, but I sure wasn't ready for the spark show. Thought I would take a break and see if prevailing wisdom has a commonsense reason why this is a bad thing to do. The fire extinguisher is close at hand... |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Scraper Plane Edge Prep | Woodworking | |||
Tablesaw problems (A long one) | Woodworking | |||
Tablesaw Blade Alignment | Woodworking | |||
FAQ: HAND TOOLS (Repost) | Woodworking | |||
Stryco blade welder | Metalworking |