Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
i beam question
i have an enclosed sunroom attached to the side of my house. i can enter
the room through a standard size doorway but i would like to open the entrance considerably, about 10 feet or so.i guess the way to go would be to put in an i beam header to support the weight. what size i beam would i use? the i beam would be part of an exterior load bearing wall. thanks, cj |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Making a beam from oak | Woodworking | |||
Simple question regarding Ceiling tiles and sound? | UK diy | |||
Simple question regarding Ceiling tiles and sound? | Home Repair | |||
Sagging Floors, Jack Posts, Sandwich Beams | Home Repair |