Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Wood hand saw sharpening question
I have sharpened a few cross cut saws with moderate success. I was reviewing this link http://www.vintagesaws.com/cgi-bin/f...mer/sharp.html and I note that it is stressed that one should always apply the bevel angle c.c.w. with the saw handle to the right so that you are filing towards the toe of the saw. Lee in his sharpening book does not explain it explicitly but a photograph on page 151 indicates the opposite. Any one have any comments? (I know this is a wood working tool but we are dealing with a metal cutting edge here) TIA, John. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
### micro-FAQ on wood # 028 | Woodworking | |||
Steam Bending Lumber - Any Good Sites | Woodworking | |||
FAQ - Steambending | Woodworking | |||
### micro-FAQ on wood # 027 | Woodworking | |||
### micro-FAQ on wood # 016 | Woodworking |