Wood hand saw sharpening question
 

I have sharpened a few cross cut saws with moderate success. I was
reviewing this link
http://www.vintagesaws.com/cgi-bin/f...mer/sharp.html
and I note that it is stressed that one should always apply the bevel angle
c.c.w. with the saw handle to the right so that you are filing towards the
toe of the saw. Lee in his sharpening book does not explain it explicitly
but a photograph on page 151 indicates the opposite.

Any one have any comments? (I know this is a wood working tool but we are
dealing with a metal cutting edge here)

TIA, John.

Wood hand saw sharpening question
 

I would try crossposting to rec.woodworking . I know several people
have mentioned attempts/expertise at saw sharpening.

Wood hand saw sharpening question
 

I just completed about 120 handsaws for two of the regional tech
schools.
I used to machine file them but it made a nicely uniform mediocre job
at best.
What you want to do is always file in the direction the tooth is set so
that the file cuts evenly without chatter.
This includes rip saws as well so that you even out any angle errors
and the saw cuts true.

Don't go balistic when you joint the teeth- take a swipe across the
tops and then file a stroke through the teeth and see how you do.

Try to limit your set to the top 1/3 or so of the tooth, go easy
because you can add more set but getting rid of too much is not so
easy.

Wood hand saw sharpening question
 

wrote in message
oups.com...
I just completed about 120 handsaws for two of the regional tech
schools.
I used to machine file them but it made a nicely uniform mediocre job
at best.
What you want to do is always file in the direction the tooth is set so
that the file cuts evenly without chatter.
This includes rip saws as well so that you even out any angle errors
and the saw cuts true.

Don't go balistic when you joint the teeth- take a swipe across the
tops and then file a stroke through the teeth and see how you do.

Try to limit your set to the top 1/3 or so of the tooth, go easy
because you can add more set but getting rid of too much is not so
easy.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks for your reply, however it is still not clear to me. Take the case
of a crosscut saw where the heel (grip) is to your right. Do I file a
gullet with a tooth set away to the left and towards you to the right with
the file handle oriented 15 deg (say) left a la Lee, or do I file the
adjacent gullet with the tooth set away to the right with the file handle
oriented to the right so I am filing towards the toe? In both cases the
file handle is dropped 15 deg so that the gullet angle is maintained.

Wood hand saw sharpening question
 

Thanks.
"woodworker88" wrote in message
oups.com...
I would try crossposting to rec.woodworking . I know several people
have mentioned attempts/expertise at saw sharpening.

Wood hand saw sharpening question
 

Go and try either way- what you will find is that the file feels
smoother and chatters less when you are filing with the set. The
difference is enough to notice right away with no confusion. If you
are just starting out take and ink the teeth up with a marking pen as
it will give you a nice visual proof of how the file is engaging the
tooth.
Trying to visualize the saw in my head just makes it too complicated.
If you are dropping the file handle that is to produce a type of
sloping gullet which the geezers claim is better in softwoods.

Wood hand saw sharpening question
 

wrote:
Go and try either way- what you will find is that the file feels
smoother and chatters less when you are filing with the set. The
difference is enough to notice right away with no confusion. If you
are just starting out take and ink the teeth up with a marking pen as
it will give you a nice visual proof of how the file is engaging the
tooth.
Trying to visualize the saw in my head just makes it too complicated.
If you are dropping the file handle that is to produce a type of
sloping gullet which the geezers claim is better in softwoods.

Filing with the set? Now I'm confused. Because, when I file with a
triangular file, I find that I'm filing the back side of one tooth and
the front side of another - and one of those teeth is set towards me.

As far as dropping the file handle goes, not only does it produce a
sloping gullet, but it also gives teeth with a more acute angle.
Which, I think, is the real reason some people may like them better for
softwoods.

John Martin

Wood hand saw sharpening question
 

Jointing pressure is applied towards the tooth that is set in the
direction the file is travelling.
In other words you really are not taking an equal amount off of each
side when you take a stroke with the file-you are actually removing a
bit more from the tooth that is set away from you.
It all evens out when you turn the saw around and do the other side.