Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
rhncue
 
Posts: n/a
Default hobbyplating

Hey, does anyone know if Hobbyplating.com is still in business? I've
been calling them since Fri. and one of their tel.# is disconnected and
there is no answer on the other with no message or mail-box or anything
else.
Dick

--
Building and repair of fine custom cues at affordable
prices for real poolplayers. Over 35yrs. exp.
Richard H. Neighbors 318 Linden st. Cinti. OH
ph.# (513) 242-1700
web-site: http://www.dickiecues.com




  #2   Report Post  
Russ Wizinsky - ProfessorWiz
 
Posts: n/a
Default hobbyplating

That's one of the main reasons I decided to buy from Caswell plating. I was
going to buy a titanium chiller coil but could never get a hold of them, then
1/2 the time about 2 months ago their web site was shut down. I was kind of
concerned about sending my money there. Caswell has treated me fine so far,
i've got a link to their site on my web site.

Russ



Russ Wizinsky

www.professorwiz.com
www.metalhobbies.com
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 07:40 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"