DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   FS - anyone want this nice meter for their power generator? (https://www.diybanter.com/metalworking/125481-fs-anyone-want-nice-meter-their-power-generator.html)

william_b_noble October 19th 05 07:18 AM

FS - anyone want this nice meter for their power generator?
 
new Weston panel meter, calibrated in "percent of rated current", with
scales for 50 cps and 60 cps (that dates it, no?), model 1534, it says
"FS=5A" which makes me think that full scale will be 5 amps, it's marked
"sealed, do not open, ruggedized", 2.5 inch round meter, total OD with
flange is about 3.5 inches, box includes an envelope of mounting hardware.
I believe this came off of aircraft ground support equipment. $6 for the
meter, I don't think the box will fit in a flat rate envelope, and in the
box it weighs a little over a pound, so let's say $5 for shipping.

let me know if you want this (there may be more, I dont' know yet - found a
new source of interesting goodies)


--
Bill

to Email me, repair this address and use it:
william_ b_ noble at msn dot com

also check out http://www.wbnoble.com



[email protected] October 19th 05 12:09 PM

FS - anyone want this nice meter for their power generator?
 
The 5A current rating suggests that it was meant to be used with a
current transformer, not directly on the power line itself. These are
round or sometimes square plastic cases with a round central hole and
two terminals.

jw


william_b_noble October 20th 05 04:43 AM

FS - anyone want this nice meter for their power generator?
 
either a current transformer, or a shunt of some kind, I suppose - but all I
have is this meter. it is an AC meter - I just tested that fact - it has a
red dot on the back, presumably the standard MIL inspector's dot rather than
an indicator of the positive terminal. Anyway, 5 amps AC might be useful
to measure, and a shunt is just a length of wire


wrote in message
oups.com...
The 5A current rating suggests that it was meant to be used with a
current transformer, not directly on the power line itself. These are
round or sometimes square plastic cases with a round central hole and
two terminals.

jw




Martin H. Eastburn October 21st 05 02:08 AM

FS - anyone want this nice meter for their power generator?
 
Make a shunt - and calibrate it 5 amps reading 1 amp. Then your meter is 25 amps.
Likewise in reverse.

Martin
Martin Eastburn
@ home at Lions' Lair with our computer lionslair at consolidated dot net
NRA LOH, NRA Life
NRA Second Amendment Task Force Charter Founder



william_b_noble wrote:
either a current transformer, or a shunt of some kind, I suppose - but all I
have is this meter. it is an AC meter - I just tested that fact - it has a
red dot on the back, presumably the standard MIL inspector's dot rather than
an indicator of the positive terminal. Anyway, 5 amps AC might be useful
to measure, and a shunt is just a length of wire


wrote in message
oups.com...

The 5A current rating suggests that it was meant to be used with a
current transformer, not directly on the power line itself. These are
round or sometimes square plastic cases with a round central hole and
two terminals.

jw





----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----


All times are GMT +1. The time now is 03:43 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter