Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
10" Rockwell Lathe spindle help
I heard the taper is a modified b&s 9 . Thats fine, but there is a set
screw/pin inside the spindle. THe pin stops me from putting in a center. Can that pin/set screw be removed, and if so how. Thanks |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
rockwell lathe | Metalworking | |||
Spindle wobble... | Metalworking | |||
New Rockwell lathe and some questions about it. | Metalworking | |||
FS: Rockwell Delta 11"x36" Lathe | Metalworking |