Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
1/2" poly burst pressure
What is the burst pressure of 1/2" black poly tubing rated for 100psi. I
want to bury it as an air line between my house and work building so it will have up to 125 psi in it. I have a lot of it for free that is why I want to use it. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
low water pressure solution? | Home Repair | |||
trenching and other uses of a high pressure washer | Home Repair | |||
Residential water pressure design - Help | Home Repair | |||
Charge pressure for sealed CH system | UK diy | |||
Slightly OT "pressure" | Metalworking |