Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
FS, South Bend Model A Precision 9" Lathe
FS, South Bend Model A Precision 9" Lathe
Technical Data; Catalog #CL644Z Quick-Change Gearbox. Equipped With: 208-220-440V / 3-phase / 60 Swing over Cross slide: 5½" Swing over bed: 9 ¾" inches Overall Bed Length 3 1/2Ft. 12 Speeds from 40-1270 rpm Hole through Spindle: ¾" Maximum Collet Capacity: ½" Motor ½ hp, 1725 rpm, 220/440 volts 3 phase - NOTE easy to change motor for single phase Cross feed Dial graduations: 0 - 100 or .001 inch per grad. Compound Dial graduations: 0 - 100 or .001 inch per grad. Distance between centers: 18 inches Carriage Feeds: .0836 to .0015 inches per rev. Thread Cutting: 4 - 224 threads per inch Tailstock: #2 MT and 2" stroke and graduations. Controls, Forward and reverse hand switch; $650. In Boston area. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
South Bend lathe with bad babbit bearing ..help! | Metalworking | |||
south bend 10L lathe | Metalworking |