Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
rewiring 440 3 phase to 208 3 phase
Hello,
First time posting here- have enjoyed the forum in the past (enjoyed reading "teenut's" posts too!!) and found it very informative. Hopefully someone can help me with my wiring question. I have a bench grinder that I believe is currently wired for 440 3 phase. The motor has 6 wires. 3 going to a terminal block, and 3 bundled together. I need to wire this for 208v and there is no wiring diagram. Any help would be appreciated. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
My $45 homemade 10 HP phase converter is WORKING!!! | Metalworking | |||
My $45 homemade 10 HP phase converter is WORKING!!! | Home Repair | |||
My $45 homemade 10 HP phase converter is WORKING!!! | Home Repair | |||
Motor capacitor sizing? | Metalworking | |||
Phase converter balancing | Metalworking |