Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
help - Futuba pulscale
so, I really wanted someting like a trav-a-dial, but I went off and bought
this Futuba pulscale FM, model FM10EB, which has an amplifire unit EDE205 (it's marked 5volts) - I figured I could use a spare counter I have as a readout, but that would require a connection diagram. I've found a manual in Japanese, but nothing in english after searching the web a lot so: anyone on this NG familiar with these devices and the associated readouts? the easist thing would be to find a matching readout, the next easist would be to find a manual that shows the connections required Actually, the easist would be to find someone who has a Trav-a-dial type indicator that would like to trade for this DRO so, any ideas? -- Bill to Email me, repair this address and use it: william_ b_ noble at msn dot com also check out http://www.wbnoble.com |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|