Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
paper steam engine
Origami steam engine??
Free steam engine model made entirely with paper http://www.home.earthlink.net/~eellbee/steam2.html This might be an interesting project. |
#2
|
|||
|
|||
I found a bunch of paper spacecraft models a while ago. neat stuff from
NASA http://www.nasa.gov/audience/foreduc...gy/Models.html Rex wrote: Origami steam engine?? Free steam engine model made entirely with paper http://www.home.earthlink.net/~eellbee/steam2.html This might be an interesting project. |
#3
|
|||
|
|||
Why?
Bob Swinney "Rex" wrote in message nk.net... Origami steam engine?? Free steam engine model made entirely with paper http://www.home.earthlink.net/~eellbee/steam2.html This might be an interesting project. |
#4
|
|||
|
|||
Robert Swinney wrote:
Why? Because you can also do it in sheet metal, with a big hammer and a torch. "Blacksmith's origami[tm]" Nick -- Motormodelle / Engine Models: http://www.motor-manufaktur.de Ellwe 2FB * VTM 87 * DLM-S3a * cubic more to come ... |
#5
|
|||
|
|||
Or sheet brass, a smaller hammer and a torch, and with the currant
interest in miniatures, probably make some coin on the side. ""Nick Müller"" wrote in message ... | Robert Swinney wrote: | | Why? | | Because you can also do it in sheet metal, with a big hammer and a | torch. "Blacksmith's origami[tm]" | | | Nick | -- | Motormodelle / Engine Models: | http://www.motor-manufaktur.de | Ellwe 2FB * VTM 87 * DLM-S3a * cubic | more to come ... |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Steam Engine Valve Gear driven by Steam Pressure? | Metalworking | |||
Steam Bending Lumber - Any Good Sites | Woodworking | |||
FAQ - Steambending | Woodworking | |||
Anyone know of steam engine simulation software | Metalworking | |||
auction alert: large antique steam engine | Metalworking |