DIY injector type vacuum pump: Plan, photos and experiences
Hello,
some will remember the vacuum pump thread. Don Foreman was kind enough to make a scetch of his HF injector. I built mine with some changes, made a plan (PDF, metric), made some photos and wrote down what you have to take care of if you want to build your own. Mine is pulling 0.89 bar (or 12.9 PSI; 26.3 in Hg) at 400m (1200 ft) above sea level @ 100 PSI on the input side. If you want, have a look he http://www.motor-manufaktur.de/werkstatt/07_vacuum_pumpe/en_index.html If you have any questions, comments, suggestions or whatever, I'll be glad to answer. Note: As always, it took longer to make the drawing and to cast all in HTML. Well, it's worth the time considering the help I got here. Nick -- Motormodelle / Engine Models: http://www.motor-manufaktur.de Ellwe 2FB * VTM 87 * DLM-S3a * cubic more to come ... |
All times are GMT +1. The time now is 03:53 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter