Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Nichols 5H hand mill
OK, I got the mill home and dissembled. Apparently for the last few years,
( decades) it was used for 1 job only, making a slot. Table moves easy, as does the cross slide, but that was it. I don't think the Knee had moved since the last century, and the rise/fall head felt like it was welded in place. It took a lot of sweat and a few cans of WD40 to get things loose. And why in Gods name did Nichols put 1 screw for the gib on the head on the inside so you need to remove the head to get to the screw. (it is in the manual, but I missed it the first hounded times) I put the pictures on my site, http://www.westcanalcrafts.com/nichols_mill.html , Now comes the fun, making it run again. gary |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
(mis)adventures moving a Nichols mill | Metalworking | |||
picked up the nichols | Metalworking | |||
Pools horizontal milling machine | Metalworking |