RF-31 Mill/Drill, BD-920N Lathe, 2'x4'x6" Starrett granite surface plate,
Kennedy 7-Drawer Roller Tool Cabinet, Digital Micrometers and Calipers,
Bore & Height Gages, Webber gage block set, Renco Encoders, ER Collets,
Drill Chucks and lots, lots more.
Get full details and prices at http://tinyurl.com/cqv7x

--
Griz (aka Steve)
To EMail reply delete a letter from each side of @
Tools-n-Gizmos - http://www.Tools-n-Gizmos.com

On Tue, 12 Jul 2005 03:58:23 GMT, "Griz"
wrote:

RF-31 Mill/Drill, BD-920N Lathe, 2'x4'x6" Starrett granite surface plate,
Kennedy 7-Drawer Roller Tool Cabinet, Digital Micrometers and Calipers,
Bore & Height Gages, Webber gage block set, Renco Encoders, ER Collets,
Drill Chucks and lots, lots more.
Get full details and prices at http://tinyurl.com/cqv7x

Whose mad wife might you be? Done some time recently?

The Mad Ex-Wife is my daughter. I'm just helping her sell some community
property to help pay community debt. besides being abusive he was a big
spender.

--
Griz (aka Steve)
To EMail reply delete a letter from each side of @
Tools-n-Gizmos - http://www.Tools-n-Gizmos.com


"Don Foreman" wrote in message
news
On Tue, 12 Jul 2005 03:58:23 GMT, "Griz"
wrote:

RF-31 Mill/Drill, BD-920N Lathe, 2'x4'x6" Starrett granite surface plate,
Kennedy 7-Drawer Roller Tool Cabinet, Digital Micrometers and Calipers,
Bore & Height Gages, Webber gage block set, Renco Encoders, ER Collets,
Drill Chucks and lots, lots more.
Get full details and prices at http://tinyurl.com/cqv7x

Whose mad wife might you be? Done some time recently?

Good luck on some of those prices.
"Griz" wrote in message
...
The Mad Ex-Wife is my daughter. I'm just helping her sell some community
property to help pay community debt. besides being abusive he was a big
spender.

--
Griz (aka Steve)
To EMail reply delete a letter from each side of @
Tools-n-Gizmos - http://www.Tools-n-Gizmos.com


"Don Foreman" wrote in message
news
On Tue, 12 Jul 2005 03:58:23 GMT, "Griz"
wrote:

RF-31 Mill/Drill, BD-920N Lathe, 2'x4'x6" Starrett granite surface plate,
Kennedy 7-Drawer Roller Tool Cabinet, Digital Micrometers and Calipers,
Bore & Height Gages, Webber gage block set, Renco Encoders, ER Collets,
Drill Chucks and lots, lots more.
Get full details and prices at http://tinyurl.com/cqv7x

Whose mad wife might you be? Done some time recently?

Griz wrote:
The Mad Ex-Wife is my daughter. I'm just helping her sell some community
property to help pay community debt. besides being abusive he was a big
spender.

No doubt, you have only heard one side of the story. It's easier to
blame someone other than your daughter, but in most failed marriages
there is enough blame to go around. It's just not very classy to trash
your ex-Son-in-Law.

Your lack of class is enough to make me not buy anything, and then I saw
your high prices. Wow! Good luck getting what you are asking!

Well,,,,, when abuse of spouse and/or children is involved I have no class
at all.
If I had my way the subject line would be "Widow Selling Tools".

Griz (aka Steve)
To EMail reply delete a letter from each side of @
Tools-n-Gizmos - http://www.Tools-n-Gizmos.com


"No Spam" wrote in message
...
Griz wrote:
The Mad Ex-Wife is my daughter. I'm just helping her sell some community
property to help pay community debt. besides being abusive he was a big
spender.

No doubt, you have only heard one side of the story. It's easier to blame
someone other than your daughter, but in most failed marriages there is
enough blame to go around. It's just not very classy to trash your
ex-Son-in-Law.

Your lack of class is enough to make me not buy anything, and then I saw
your high prices. Wow! Good luck getting what you are asking!

In article , Griz
says...

If I had my way the subject line would be "Widow Selling Tools".

Do NOT do this sir. You are posting this information in broad
daylight and from what I gather the spouse may well be aware
of this board.

Any comments like that from you at this time may be taken in the
wrong light by other parties. I understand your feelings but
you may well be doing more harm than good by displaying them
here. 'Nuf said.

Jim


--
==================================================
please reply to:
JRR(zero) at pkmfgvm4 (dot) vnet (dot) ibm (dot) com
==================================================

On Tue, 12 Jul 2005 08:41:14 GMT, "Griz"
wrote:

The Mad Ex-Wife is my daughter. I'm just helping her sell some community
property to help pay community debt. besides being abusive he was a big
spender.

Community property? Wouldn't a person be allowed to keep his tools in
order to make a living?
Randy

Griz wrote:
The Mad Ex-Wife is my daughter. I'm just helping her sell some community
property to help pay community debt. besides being abusive he was a big
spender.


Got a picture of her to go with the tools? I might take the whole
package if the price were right..

John

JohnM wrote:
Griz wrote:

The Mad Ex-Wife is my daughter. I'm just helping her sell some
community property to help pay community debt. besides being abusive
he was a big spender.


Got a picture of her to go with the tools? I might take the whole
package if the price were right..

John

Be very careful...I think you would get the father-in-law too!

JohnM wrote in article
.. .
Griz wrote:
The Mad Ex-Wife is my daughter. I'm just helping her sell some
community
property to help pay community debt. besides being abusive he was a big

spender.


Got a picture of her to go with the tools? I might take the whole
package if the price were right..

John



I hope you have an iron-clad pre-nup ready..........

Spam alert:
http://www.tools-n-gizmos.com/store/agora.cgi

Looks like a good story to get someone looking at an ol-line store.

Griz wrote:

RF-31 Mill/Drill, BD-920N Lathe, 2'x4'x6" Starrett granite surface plate,
Kennedy 7-Drawer Roller Tool Cabinet, Digital Micrometers and Calipers,
Bore & Height Gages, Webber gage block set, Renco Encoders, ER Collets,
Drill Chucks and lots, lots more.
Get full details and prices at http://tinyurl.com/cqv7x

I guess I made a mistake by adding the link to my store on the page I
generated for my daughter.
Its now removed.
The "story" is real. The "pain" is real.

--
Griz (aka Steve)
To EMail reply delete a letter from each side of @
Tools-n-Gizmos - http://www.Tools-n-Gizmos.com


"RoyJ" wrote in message
ink.net...
Spam alert:
http://www.tools-n-gizmos.com/store/agora.cgi

Looks like a good story to get someone looking at an ol-line store.

Griz wrote:

RF-31 Mill/Drill, BD-920N Lathe, 2'x4'x6" Starrett granite surface plate,
Kennedy 7-Drawer Roller Tool Cabinet, Digital Micrometers and Calipers,
Bore & Height Gages, Webber gage block set, Renco Encoders, ER Collets,
Drill Chucks and lots, lots more.
Get full details and prices at http://tinyurl.com/cqv7x

Give me your "ex-Wife's" home phone number and I'm sure I can workout a much
better deal with her.... NICE SPAM

My daughters phone number is on the Mill, Lathe, Granite, Kennedy and
Cabinet page.
Mine is on the More Stuff page because I brought those items up to my place
to take pics and write up the descriptions.

Feel free to negotiate any deal your wish directly with her.

--
Griz (aka Steve)
To EMail reply delete a letter from each side of @
Tools-n-Gizmos - http://www.Tools-n-Gizmos.com


"HotRod" wrote in message
...
Give me your "ex-Wife's" home phone number and I'm sure I can workout a
much better deal with her.... NICE SPAM

On Tue, 12 Jul 2005 03:58:23 GMT, Griz wrote:
RF-31 Mill/Drill, BD-920N Lathe, 2'x4'x6" Starrett granite surface plate,
Kennedy 7-Drawer Roller Tool Cabinet, Digital Micrometers and Calipers,
Bore & Height Gages, Webber gage block set, Renco Encoders, ER Collets,
Drill Chucks and lots, lots more.
Get full details and prices at

You set up a whole business website for your daughter's divorce sale?
That's either really ambitious, or a hook to get people to follow your
spam.

The pages I created at http://tinyurl.com/cqv7x for my daughter took only a
few days.
Adding a link to my on-line store was not cool and I have removed it.

--
Griz (aka Steve)
To EMail reply delete a letter from each side of @
Tools-n-Gizmos - http://www.Tools-n-Gizmos.com


"Dave Hinz" wrote in message
...
On Tue, 12 Jul 2005 03:58:23 GMT, Griz wrote:
RF-31 Mill/Drill, BD-920N Lathe, 2'x4'x6" Starrett granite surface plate,
Kennedy 7-Drawer Roller Tool Cabinet, Digital Micrometers and Calipers,
Bore & Height Gages, Webber gage block set, Renco Encoders, ER Collets,
Drill Chucks and lots, lots more.
Get full details and prices at

You set up a whole business website for your daughter's divorce sale?
That's either really ambitious, or a hook to get people to follow your
spam.

On Wed, 13 Jul 2005 14:35:13 GMT, Griz wrote:
The pages I created at SNIPPED for my daughter took only a
few days.
Adding a link to my on-line store was not cool and I have removed it.

Makes you look like you're not being straightforward, yes.