 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Repeatability of Mill Quill DRO (Digital Scale)
I got my Quill DRO installed today and am having a repeatability
problem. Sometimes the scale will stop at -.003" instead of zeroing out. The repeatability of the scale is said to be .01mm or .0004 inches. I find that hard to believe and figured .001" at best as this is an import unit. This may me more of a quill problem than the scale. All in all it is a nice unit for $75. Any suggestion are greatly appreciated on the repeatability issue. Thanks, Steve |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Removing mill scale from HR steel | Metalworking | |||
| (mis)adventures moving a Nichols mill | Metalworking | |||
| Slitting machine, Slitting, Rolling mill, Wire Flattening Mill, Sheet Leveler, Section Leveler, Scalping Machine, Brush Machine, coiler, decoiler, recoiler, 4 Hi, 6 Hi, 4 High, 6 High, Rolling mill, Wire Flattening Mill, Polishing Machine, Rewinding | Metalworking | |||
| Reproducing mill scale | Metalworking | |||
| Mounting a Mill-drill (Quill) DRO (Digital caliper) | Metalworking | |||
Threaded Mode
