 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Atlas Lathe Timken Bearings
I have an Atlas metal lathe w/ 10" swing -- quick change gearing --
48" bed, etc. Timken bearings are installed. PROBLEM: The chuck and shaft can be lifted some small fraction of an inch (many hundreds of an inch..). Does anybody know if the bearings can be tightened? Is this adjustable or fixable? Do the bearings and or shaft need to be replaced? TIA Teddy |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| lathe - metal or wood? | Woodworking | |||
| Alpine Bearing-JC-Graziano lathe bearings | Metalworking | |||
| Logan or Atlas for first lathe purchase? | Metalworking | |||
| FS 12" Atlas lathe (someone was looking 4 1) | Metalworking | |||
| First lathe: Grizzly, Lathemaster, or used Atlas? | Metalworking | |||
Threaded Mode
