Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
I managed to scrounge up three transformers yesterday that might be
handy for someone to own. Two of them are of the buck boost type...set the taps to get the proper output voltage from high or low line voltage. The third is your standard up/down step transformer, good from 208 to 480 vots with 110 out taps as well. The small Bruce Electronics one is 3ph 30kva The Sylvania, 3pha is 30kva The GE stepping transformer is 3ph, 45 kva Located in So. California. I can deliver in a reasonable radius on my dime, or farther out if you pay a modest fee. Make offers. Gunner "Pax Americana is a philosophy. Hardly an empire. Making sure other people play nice and dont kill each other (and us) off in job lots is hardly empire building, particularly when you give them self determination under "play nice" rules. Think of it as having your older brother knock the **** out of you for torturing the cat." Gunner |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Sourcing ferrite cores for HV transformers. | Electronics Repair | |||
Surplus Transformers | Electronics Repair | |||
Spot light transformers keep blowing | UK diy | |||
confused about transformers | UK diy | |||
Transformers information | Electronics Repair |