Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #8   Report Post  
Ken Davey
 
Posts: n/a
Default

SteveB wrote:
"DeepDiver" wrote
.

I can see how the difficult work aspect of commercial diving can
take some of the joy out of being underwater. Did you ever do much
recreational diving?

I hope you get back into the sport of it. Particularly in a plaec
where the water is clear and warm and filled with amazing things to
see. You too. If you go diving this summer, have a safe and fun time!

Regards,
Michael


Thanks. I had ten years of heart problems ending with a five way
bypass and aortic valve replacement June 20, 2002. If I go diving,
it will be on a limited basis in protected water where I can just
putz around and look at things in shallow water. I get the urge now
and again, just haven't done it. Might even rent one of those
minisub things.
Steve


I wouldn't do that Steve.
Even 'putzing' around entails lots of stress on the old bod.
I have seen folks washed out of diving for lots less problems than you have.
I would suggest just snorkling but I know (from bitter experience) that once
you have tasted the freedom and the rush from that tank on your back you can
never settle for that.
Ken (certified since 1974)


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Deep Garage Wall Cabinets Denver Woody Woodworking 9 May 16th 05 03:22 AM
Deep Garage Wall Cabinets Denver Woody Woodworking 0 April 27th 05 10:06 PM
deep hollowing system rick pixley Woodturning 5 March 12th 05 12:39 PM
Deep hole drill profile question Koz Metalworking 3 October 22nd 03 07:51 PM
Deep Cycle Lead-acid Battery Tips gothika Electronics Repair 2 July 17th 03 04:08 AM


All times are GMT +1. The time now is 09:04 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"