Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
CH-10 Angle Milling
Can't find my Manual for the CH-10. I've loosened the large nut in the rear
and a small ~#6 size screw on the right side from the front. I can't get the z-axis to budge to rotate , very frustrating. Is there another detente or lock? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Blade angle problem on Delta Contractor's saw | Woodworking | |||
Musing about up milling, down milling, shearing and scraping. | Woodturning | |||
Two slides and angle vise | Metalworking | |||
milling arbors | Metalworking | |||
Angle Iron for a loft | Metalworking |