DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   where to find a rectangular cube for casting ? (https://www.diybanter.com/metalworking/10469-where-find-rectangular-cube-casting.html)

Jack July 14th 03 06:36 PM

where to find a rectangular cube for casting ?
 
Hi I was wondering if anyone had any ideas about where to find a
approx. 10" h x 5" w x 4" deep solid cube (no lines) so I can make a
mold of it and cast resins or whatever into it ??

The only thing I could find are some trophy cubes (that are hollow);
these are a pain to try and seal..

Thanks!

jack

Ron Thompson July 14th 03 07:12 PM

where to find a rectangular cube for casting ?
 
How about a chunk of tree?

--

Ron Thompson
On the Beautiful Mississippi Gulf Coast
USA

Moderator of http://groups.yahoo.com/group/castinghobby/

http://www.plansandprojects.com

"A man who works with his mind, heart, and billfold is an Entrepreneur"
Joe Martin, owner of Sherline Products, Inc.
"Jack" wrote in message
om...
Hi I was wondering if anyone had any ideas about where to find a
approx. 10" h x 5" w x 4" deep solid cube (no lines) so I can make a
mold of it and cast resins or whatever into it ??

The only thing I could find are some trophy cubes (that are hollow);
these are a pain to try and seal..

Thanks!

jack





Stan Stocker July 14th 03 07:17 PM

where to find a rectangular cube for casting ?
 
Hi Jack,

How about making it out of plywood? You could glue and screw (or air
nail with a brad gun), fill any defects, sand, and finish with a high
gloss finish. A couple of sandings between coats of finish and you
should be able to create a very smooth surface.

You might want to weight the box before closing it up so it isn't
excessively bouyant while making the mold.

Cheers,
Stan

Jack wrote:
Hi I was wondering if anyone had any ideas about where to find a
approx. 10" h x 5" w x 4" deep solid cube (no lines) so I can make a
mold of it and cast resins or whatever into it ??

The only thing I could find are some trophy cubes (that are hollow);
these are a pain to try and seal..

Thanks!

jack



Ron Thompson July 14th 03 07:47 PM

where to find a rectangular cube for casting ?
 
I didn't mean for this to sound smart-assed. A piece of firewood is a lot
cheaper than store bought lumber. Cut and sand to shape, maybe a little
bondo to smooth it, and paint it.

--

Ron Thompson
On the Beautiful Mississippi Gulf Coast
USA

Moderator of http://groups.yahoo.com/group/castinghobby/

http://www.plansandprojects.com

"A man who works with his mind, heart, and billfold is an Entrepreneur"
Joe Martin, owner of Sherline Products, Inc.
"Ron Thompson" wrote in message
...
How about a chunk of tree?

--

Ron Thompson
On the Beautiful Mississippi Gulf Coast
USA

Moderator of http://groups.yahoo.com/group/castinghobby/

http://www.plansandprojects.com

"A man who works with his mind, heart, and billfold is an Entrepreneur"
Joe Martin, owner of Sherline Products, Inc.
"Jack" wrote in message
om...
Hi I was wondering if anyone had any ideas about where to find a
approx. 10" h x 5" w x 4" deep solid cube (no lines) so I can make a
mold of it and cast resins or whatever into it ??

The only thing I could find are some trophy cubes (that are hollow);
these are a pain to try and seal..

Thanks!

jack








Fred Renner July 14th 03 08:47 PM

where to find a rectangular cube for casting ?
 
Do you want to mold a smooth-surfaced right rectangular prism or just a
rough block for further work? If you just want a block mold, visit a
commercial cooking supply store and look for the appropriate size baking pan
or mold. Some bread pans are about the right size and they even have plenty
of draft for unmolding.

If you want a straight-sided block you might be able to find a suitable
plastic storage box in an office or home supply store. It should still have
a wee bit of draft (a good thing) because it had to come out of its mold.
Fill it with sand to help it hold shape while you cast your mold around it.

Fred

"Jack" wrote in message
om...
Hi I was wondering if anyone had any ideas about where to find a
approx. 10" h x 5" w x 4" deep solid cube (no lines) so I can make a
mold of it and cast resins or whatever into it ??

The only thing I could find are some trophy cubes (that are hollow);
these are a pain to try and seal..

Thanks!

jack




Pete & sheri July 15th 03 03:55 AM

where to find a rectangular cube for casting ?
 
Make a block of wood the size you want, then cast fiberglass over it.
Remove block of wood.

Pete Stanaitis

Jack wrote:

Hi I was wondering if anyone had any ideas about where to find a
approx. 10" h x 5" w x 4" deep solid cube (no lines) so I can make a
mold of it and cast resins or whatever into it ??

The only thing I could find are some trophy cubes (that are hollow);
these are a pain to try and seal..

Thanks!

jack



bigegg July 31st 03 08:31 PM

where to find a rectangular cube for casting ?
 

On 14 Jul 2003 10:36:20 -0700, (Jack) was
bump'n their gums abowt:

Hi I was wondering if anyone had any ideas about where to find a
approx. 10" h x 5" w x 4" deep solid cube (no lines) so I can make a
mold of it and cast resins or whatever into it ??

The only thing I could find are some trophy cubes (that are hollow);
these are a pain to try and seal..


Could you make one out of softwood? perhaps five 4x2s 5in long sanded
smooth and filled.


--
Big Egg
Visit my ebay shop for welding and tools and stuff:
http://www.stores.ebay.co.uk/honyaservices




All times are GMT +1. The time now is 09:48 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter