|
What is it? LVIII
|
4
"R.H." wrote in message ... Just posted some more photos: http://puzzlephotos.blogspot.com/ Rob 327) Some kind of hand reamer/counter bore? 328) You're making a ring out of it. There was a link on this NG about such a project. 329) A wild guess is a valve spring compressor. 330) A punch of some special type. 331) Collette, exact kind I don't know. 332) The working/grabbing end of one of those flexible grabber thingys. The fingers extend out when you push the plunger on the other end. Handy for picking up dropped bolts etc. Lane |
On Thu, 21 Apr 2005 20:10:59 GMT, "R.H." wrote:
Just posted some more photos: http://puzzlephotos.blogspot.com/ Rob 327: appears to be some sort of a reamer; maybe for finishing the dowel holes for furniture? 328: I've got several finger rings that my great-uncle made from silver coins that way. I think that he started with quarters, though. Barb |
* R. H.
Just posted some more photos: http://puzzlephotos.blogspot.com/ 327 Some cleaner tool 328 coiner (or coinerism or whatever) 329 "log on fireplace" placer 330 Tool for hammering spikes/nails into the boards without destroying the board with hammer marks. (Called "et dor" in Norwegian.) 331 Part of a combination lock 332 Part of fireworks -- Jon Haugsand Dept. of Informatics, Univ. of Oslo, Norway, http://www.ifi.uio.no/~jonhaug/, Phone: +47 22 85 24 92 |
R.H. wrote:
Just posted some more photos: http://puzzlephotos.blogspot.com/ Rob From rec.woodworking. #327: Manual router? #328: The nature of the project is to obliterate any 1965 $.05 piece ever made? #329: Old grab-it tool? #330: Seal punch? Spanner tool? #331: Collet #332: The end of a flexible grab-it tool. I use mine to fetch objects that my kids throw into the aquarium. |
On Thu, 21 Apr 2005 20:10:59 GMT, "R.H." wrote:
Just posted some more photos: http://puzzlephotos.blogspot.com/ Rob 327 Don't come near me with that thing. Wish I could find that size engine , new. 328 You can make something out of the pre '64 ones. 329 Cool , I want one. 330 Where do you find this stuff ... 331 Opposite of what I've been looking for. 332 Your gonna need this double grabber cause you dropped it deep in that plane & if you don't get it the first time your screwed. |
R.H. wrote:
Just posted some more photos: http://puzzlephotos.blogspot.com/ Rob 331 What we used to call a "rubber collet" it grabs the part over a much longer length than an ordinary collet. Jeff -- Jeffry Wisnia (W1BSV + Brass Rat '57 EE) "As long as there are final exams, there will be prayer in public schools" |
"R.H." wrote in message
... Just posted some more photos: http://puzzlephotos.blogspot.com/ Rob Could 327 be a tool for making a rosette or similar pattern on leather? Agree 329 and 332 are a valve spring compressor and a "Grabit" tool. -- Nahmie |
Posting from rec.crafts.metalworking
327 Pipe (as in tobacco) reamer/cleaner? 328 Making a ring? 329 Dunno but stay away from me with it!! 330 Looks like a nail set with handles? 331 Collet, don't know what kind. 332 Business end of a grabber? Best Regards, Keith Marshall "I'm not grown up enough to be so old!" "R.H." wrote in message ... Just posted some more photos: http://puzzlephotos.blogspot.com/ Rob |
On Thu, 21 Apr 2005 20:10:59 GMT, "R.H." wrote:
Just posted some more photos: http://puzzlephotos.blogspot.com/ Rob 327. Pipe reamer 328. You are making a coin ring 329. A valve spring compressor for a side valve motor 330. Personal protection key fob 331. Collets 332. Parts grabber Robert |
R.H. wrote:
Just posted some more photos: 330 - Hazy memory says it's a little (jewelry sized) anvil, with the two legs dropping into holes in a bench plate. Kevin Gallimore ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
In article ,
"R.H." wrote: Just posted some more photos: http://puzzlephotos.blogspot.com/ Rob 327. Donut corer. 328. Deflation. 329. Baby forceps for difficult births in cattle and/or large women. 330. Three-hole punch. 331. Adjustable hole. 332. Engine bolt extractor. To be used with much profanity. Postin' from rcm. -- B.B. --I am not a goat! thegoat4 at airmail dot net http://web2.airmail.net/thegoat4/ |
In article ,
R.H. wrote: Just posted some more photos: http://puzzlephotos.blogspot.com/ Posting from rec.crafts.metalworking: 327) For making a shaped cavity -- in wood, I think. The shape is wrong for it to be a deburring tool for metal. And, it looks to be center-cutting, so it does not need a pre-drilled hole to start it. 328) You are making a ring, with the outer text of the coin showing up on the inside of the ring. I've known of this for years, and have recently seen this discussed in one of the fora which I frequent. I forget whether it is rec.crafts.metalworking, or a mailing list. Anyway, you cut out the center, and smooth it nicely, and finally polish the OD. P.S. You've got more patience than I had back when I first learned of this technique. Did you use a spoon, or a small hammer? 329) Support for some form of workpiece. The T-handle probably goes into some master supporting object where it can pivot, and the claws support a workpiece of some form. At a guess, I would say that it would be used by a blacksmith, to allow a heavy workpiece to be swung between the anvil and the forge (heat source). It could be an extendible grabber *if* it had: 1) A handle to extend it from the support end. 2) Another handle to grip/release the claws. Lacking those, I stand by my first impression. 330) I *think* another form of blacksmithing tool. That would mount on an anvil, to allow forming of rings and similar things. 331) An ER (Extended Range) series collet. I'm not sure which of several sizes this one is -- perhaps ER-16. (I use an ER-25 set with my little Emco-Maier Compact-5/CNC lathe, and with the companion C5 milling machine. 332) The business end of an extension grabber. The cylinder is probably 1/4" or smaller. Operated by a plunger and (probably) a T-handle grip. Most have a flexible section between the handle and the grabber fingers. Enjoy, DoN. -- Email: | Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
R.H. wrote:
Just posted some more photos: http://puzzlephotos.blogspot.com/ Rob 327. Reamer 328. Making a coin ring 329. Extend-o-arm. 330. Anvil stake 331. Collet 332. Business end of a mechanical grabber for tight spaces. RCM Gary Brady Austin, TX |
327 Reamer
328 Model of english wheel 329 Lift device. The more you lift the tighter it gets. 331 Collet 332 Screw Holder "R.H." wrote in message ... Just posted some more photos: http://puzzlephotos.blogspot.com/ Rob |
Looks like they've all been answered correctly:
327. Countersink, a tool for making a hole so the screw head will lie flush with the surface. 328. Making a coin ring 329. Patent valve spring compressor, patented Oct. 4, 1921. I didn't know what it was until I did a search on the patent date and found this page: http://www.mjdtools.com/tools/list_167/121778.htm 330. Haven't been able to verify this one, when I first got it I thought it might be one of those personal protection key fobs, but now I'm leaning towards the idea that it's a small anvil. 331. Spring collet 332. Mechanical grabber, 24" long with a spring and plunger on the other end. Thanks to all who participated this week. Rob |
328) You are making a ring, with the outer text of the coin showing
up on the inside of the ring. I've known of this for years, and have recently seen this discussed in one of the fora which I frequent. I forget whether it is rec.crafts.metalworking, or a mailing list. Anyway, you cut out the center, and smooth it nicely, and finally polish the OD. P.S. You've got more patience than I had back when I first learned of this technique. Did you use a spoon, or a small hammer? I didn't have a heavy spoon, so I did the first 80 percent with a small hammer and finished it with a regular sized one. Seems like it would take a lot longer using a spoon. Rob |
Where do you find this stuff ...
Most of it comes from the flea market. I'm getting a little low on objects to post on my site, if anyone has something that might be appropriate, please send me some photos. Rob |
#331 is a collet for a CNC mill, for CT tooling. These are the ones
for CNC's with tool changers, such as the Haas I use at the machine shop. |
| All times are GMT +1. The time now is 01:28 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter