Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Need small piece of oil impregnated sintered bronze.
I need a piece about 1" diameter by 1.5" long of oil impregnated
sintered bronze to make some bearings to repair my favorite chair. If you have some you could part with please let me know. I could trade if you need some easily shipped material that I have. Let me know what you need. I have no exotics. Just steel/alum. Mail me at joe at freakyacres daught kahm. |
#2
|
|||
|
|||
"chunk" wrote: (clip)I need a piece about 1" diameter by 1.5" long of oil impregnated sintered bronze (clip) ^^^^^^^^^^^^^^^^ Look for spare parts to a Multilith offset press. It's loaded with sintered bearings 1" OD, and varying in length. If you're lucky, the ID will be what you want, or smaller. |
#3
|
|||
|
|||
Look for "DU bearing" on the web. Lots of it all over the place. If
that doesn't do it, I'll look in my catalogs. Never seen it in a shaft, though, always in a bushing or flat bearing. "Leo Lichtman" wrote in message news | | "chunk" wrote: (clip)I need a piece about 1" diameter by 1.5" long of oil | impregnated sintered bronze (clip) | ^^^^^^^^^^^^^^^^ | Look for spare parts to a Multilith offset press. It's loaded with sintered | bearings 1" OD, and varying in length. If you're lucky, the ID will be what | you want, or smaller. | | |
#4
|
|||
|
|||
MSC carries it in stock.
Dick -- Richard H. Neighbors Building fine pool cues for real pool players at affordable prices. Over 35 years experience in cue repair. 318 Linden st. Cinti. OH 45216 ph# 513 233-7499 web site: http://www.dickiecues.com "carl mciver" wrote in message ink.net... Look for "DU bearing" on the web. Lots of it all over the place. If that doesn't do it, I'll look in my catalogs. Never seen it in a shaft, though, always in a bushing or flat bearing. "Leo Lichtman" wrote in message news | | "chunk" wrote: (clip)I need a piece about 1" diameter by 1.5" long of oil | impregnated sintered bronze (clip) | ^^^^^^^^^^^^^^^^ | Look for spare parts to a Multilith offset press. It's loaded with sintered | bearings 1" OD, and varying in length. If you're lucky, the ID will be what | you want, or smaller. | | |
#6
|
|||
|
|||
williamhenry wrote:
mcmaster likely sells the exact bushing you need Mine needs a step cut in it but it looks like they or MSC will have something that I can start out with. Thanks! |
#7
|
|||
|
|||
You didn't mention the ID but in the UK I would look for Oilite
bearings, readily available from bearing suppliers in inch and metric sizes. Typically 1" OD has a 1/8" wall and come in various lengths. Better to get one ready made to size as it does machine but IIRC should then be burnished to size like the standard ones. chunk wrote: I need a piece about 1" diameter by 1.5" long of oil impregnated sintered bronze to make some bearings to repair my favorite chair. If you have some you could part with please let me know. I could trade if you need some easily shipped material that I have. Let me know what you need. I have no exotics. Just steel/alum. Mail me at joe at freakyacres daught kahm. |
#8
|
|||
|
|||
A good hardware store will have either those flat "Sharon" bolt packs
or Jandorf packages that have many bronze bearings. |
#9
|
|||
|
|||
I have a new piece about 6 1/2" long and 7/8" in diameter.
Richard W. "chunk" wrote in message link.net... I need a piece about 1" diameter by 1.5" long of oil impregnated sintered bronze to make some bearings to repair my favorite chair. If you have some you could part with please let me know. I could trade if you need some easily shipped material that I have. Let me know what you need. I have no exotics. Just steel/alum. Mail me at joe at freakyacres daught kahm. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FAQ: HAND TOOLS (Repost) | Woodworking | |||
Steam Bending Lumber - Any Good Sites | Woodworking | |||
FAQ - Steambending | Woodworking | |||
How Much Wood Are You Willing to “Waste” (Long) | Woodworking | |||
WTD: small ceramic corner piece | UK diy |