 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Troubleshooting ball screw
We just had new ballscrews installed on our knee mill and are finding a
slight "vibration" or chatter while manually indexing the screw on the x-axis. You can feel it occurring around the same position i.e. between 0 and 90 degrees rotation of the screw. Their doesn't appear to be any interference issues between the screw and the frame. Any suggestions on trouble shooting this one? The installer is being dodgy on addressing this issue. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Electrical: when are loops at screw terminals allowed? | Home Repair | |||
| Just talking about mains tester screw drivers | UK diy | |||
| Frightening News - Dropping the "New Years Ball" | Home Repair | |||
| Home Depot not for Do-It-Yourself'ers? | Home Repair | |||
| Screw Fix delivery times | UK diy | |||
Threaded Mode
