Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
How to tell magnetic stainless?
Awl--
I suppose it's not quite as magnetic as plain carbon steel. And perhaps a spark test? Characteristics? Oh, I guess you could use the O/A test: it don't cut!! But that's pita... I've heard of machinists/heat treaters who have "catalogued" hundreds of alloys merely by the spart test on a grinding wheel--keep a box w/ reference samples. wow... ---------------------------- Mr. P.V.'d formerly Droll Troll |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
What's a good endmill for cutting stainless plate? (encountering problems) | Metalworking | |||
R*volume*raduis2 c3po "Theroy of everything" | Electronics Repair | |||
Most magnetic stainless? | Metalworking | |||
Satin finish Fridge & Stainless Steel Appliances OK? | Home Ownership | |||
Knife Steel FAQ updated | Metalworking |