Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
parts needed for Delta Table Saw
I have an old Delta Table Saw, a Super 10 model 34-710. It is missing a
blade guard support rod and the blade guard assembly itself. Delta has the blade guard in stock, but the support rod is no longer available. The part numbers a Blade Guard Support Rod - 417-89-089-0002 Blade Guard Assembly - 1087468 If anyone has a saw with these part numbers, and wants to part with the parts, please contact me by removing the numbers from the e-mail addy |
#2
|
|||
|
|||
"USENET READER" wrote in message k.net... I have an old Delta Table Saw, a Super 10 model 34-710. It is missing a blade guard support rod and the blade guard assembly itself. Delta has the blade guard in stock, but the support rod is no longer available. The part numbers a Blade Guard Support Rod - 417-89-089-0002 Blade Guard Assembly - 1087468 If anyone has a saw with these part numbers, and wants to part with the parts, please contact me by removing the numbers from the e-mail addy My blade guard on the Delta I own is just a black piece of all thread. Check to see what the guard needs for attachment and go from there. |
#3
|
|||
|
|||
I did that - that is where I came up with the part number for the blade
guard support rod. The same needs this rod to be attached to the motor base in order to attach a blade guard/splitter. SQLit wrote: "USENET READER" wrote in message k.net... I have an old Delta Table Saw, a Super 10 model 34-710. It is missing a blade guard support rod and the blade guard assembly itself. Delta has the blade guard in stock, but the support rod is no longer available. The part numbers a Blade Guard Support Rod - 417-89-089-0002 Blade Guard Assembly - 1087468 If anyone has a saw with these part numbers, and wants to part with the parts, please contact me by removing the numbers from the e-mail addy My blade guard on the Delta I own is just a black piece of all thread. Check to see what the guard needs for attachment and go from there. |
#4
|
|||
|
|||
"USENET READER" wrote in message k.net... I have an old Delta Table Saw, a Super 10 model 34-710. It is missing a blade guard support rod and the blade guard assembly itself. Delta has the blade guard in stock, but the support rod is no longer available. The part numbers a Blade Guard Support Rod - 417-89-089-0002 Blade Guard Assembly - 1087468 If anyone has a saw with these part numbers, and wants to part with the parts, please contact me by removing the numbers from the e-mail addy If anything like my Craftsman TS it's just a long round steel stock you could get from a hardware store. Have you tried ebay or Sears parts? Come to think of it I don't remember anyone using factory bladeguards for years including the woodworking gurus on TV - there must be a lot guards laying around. Off course everyone should use bladeguards. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sony cd changer parts needed... | Electronics Repair | |||
Alpine CDA-9811 CD Mech Parts Needed | Electronics Repair | |||
Table saw reviews?? | Woodworking | |||
Router Table Top Questions | Woodworking | |||
Right AND Left Tilt Table Saw? | Woodworking |