Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Setting up Meter Base
I would like to ask a few questions regarding installing a underground feed
meter base to a metal building that has the corrugated wall panels that are 1 1/2" deep. Meter Base/200A Metal Building Servive 100A 2" Plastic Conduit, Sch 80 1. Is it okay to screw the meter base to the high areas of the wall panels utilizing self tapping screws? 2. Can I run the wires for the load side through the back of the meter base through metal or plastic conduit or must it come out the side with an "LB" fitting going throught the wall panel. 3. Can I go smaller conduit to the load side? 4. Must the wires for the load side to the breaker panel be of the same size of line side ? 5. Can I set up the breaker panel on the inside mounted to some flat bar that will be strapped on the the "girts" ? Thanks in advance. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Quickie review of General International "Universal Mobile Base" (50-025) | Woodworking | |||
Novice seeks any tips for installing rubber wall base | Home Repair | |||
munet digital electric watthour meter login problem INTERESTING TECHNOLOGY! | Home Repair | |||
Porter Cable 690 router mounted to TS extension, do I use plunge base or standard | Woodworking | |||
Huge water bill; freeze; meter failure; who should pay? | Home Repair |