Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
LesU
 
Posts: n/a
Default need a new roof

We have a nice house, with a standard roof over plywood. At least 30
years old. The west facing side is very worn and needs to be replaced.
The house is a Mock Tudor. There seems to be 4 options:

1. lay shingles over the existing roof.
2. lay new 30-40 year roof.
3. cover only the west facing roof
4. replace the west facing roof.

Any suggestions on what use as roofing material, under fabric,
alternate stuff, like artifical slate material

I will be getting estimates on all the options, don't have them yet
and it will be expensive.

We live in Seattle, below the snow lines.

Any help on what to look for, look out for or other ideas would be
welcome.
--
les ungerleider


  #2   Report Post  
Edwin Pawlowski
 
Posts: n/a
Default


"LesU" wrote in message ...


1. lay shingles over the existing roof.


Can be done if everything is in good shape, not buckles, etc. Tear off is
better but add to the cost.

2. lay new 30-40 year roof.


Yep.

3. cover only the west facing roof
4. replace the west facing roof.


In a year or two you will be doing the rest. May be prudent to do it all at
one time. Less problems matching, etc.


Any suggestions on what use as roofing material, under fabric, alternate
stuff, like artifical slate material


There are some very nice loking shingles available from the better
manufacturers. If yo want something really sharp looking, check them out.




  #3   Report Post  
Tony Hwang
 
Posts: n/a
Default

Edwin Pawlowski wrote:
"LesU" wrote in message ...


1. lay shingles over the existing roof.



Can be done if everything is in good shape, not buckles, etc. Tear off is
better but add to the cost.


2. lay new 30-40 year roof.



Yep.


3. cover only the west facing roof
4. replace the west facing roof.



In a year or two you will be doing the rest. May be prudent to do it all at
one time. Less problems matching, etc.


Any suggestions on what use as roofing material, under fabric, alternate
stuff, like artifical slate material



There are some very nice loking shingles available from the better
manufacturers. If yo want something really sharp looking, check them out.




Hi,
I'd remove old shingles to inspect underneath.(why put on extra weight
on the roof keeping old layer?; lazy man's job)
Install new flashings, if there is any repairs needed do it, then
install your choice of new shingles. There are many many choices.
This is what I'd do if I plan to live in the house long time.
Tony
  #4   Report Post  
John Willis
 
Posts: n/a
Default

On Wed, 05 Jan 2005 04:37:49 GMT, Tony Hwang
scribbled this interesting note:

Hi,
I'd remove old shingles to inspect underneath.(why put on extra weight
on the roof keeping old layer?; lazy man's job)
Install new flashings,


Why install all new flashings? The assumption you seem to be making is
that all the existing flashings are bad. They may not be. 30 year old
lead plumbing vent flashings are actually of better quality than
similar flashings you can buy today, and far superior to any of the
cheap flashings with neoprene seals that are commonly used now.
Furnace and water heater flashings commonly rust out and require
replacement, to be sure, but not all roof jacks and vents necessarily
need to be replaced simply because a new roof is being installed.

One item that needs to be addressed, no matter who performs the work,
is that wherever a plane of a roof meets a wall or chimney, that area
will have the proper flashing and counter flashing installed. Far too
often installers choose to merely tar in these trouble spots with no
effort given to doing the job correctly. In these instances leaks
develop anytime between immediately and six months to a year.
Skylights are another area that never accept any less than a correctly
done installation and proper care must be taken to keep you, the
homeowner, happy and content!


--
John Willis
(Remove the Primes before e-mailing me)
  #5   Report Post  
LesU
 
Posts: n/a
Default

had the estimator out, will get the 4 estimates in a few days, he
feels that the west side is buckling, I can't see any.

The recommended shingles are owens corning oakridge pro series
shingles 2002 in one of the grays (we get blackend from a incenerator
from the other side of pudget sound, over years). Any comments?
questions to ask company? layers under the shingles? zinc? anything
else.

Shingles are a once or twice in a lifetime purchase, they are everyday
to the contractor!!!

LES UNGERLEIDER




----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Spray in foam insulation + minimum roof slope? Albert Home Repair 13 November 9th 04 06:53 PM
Get a New Roof But Don't Add Any Ventilation? Jay Chan Home Repair 12 March 30th 04 05:16 PM
FLAT ROOF - modern recovering methods? Richard Sterry UK diy 10 March 29th 04 10:28 AM
Pitch and gravel roof? Terry UK diy 3 February 25th 04 02:43 PM
Pitch and gravel roof? Terry Home Repair 3 February 25th 04 02:43 PM


All times are GMT +1. The time now is 08:09 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"