DIYbanter - Sand Wood Flooring

DIYbanter (https://www.diybanter.com/)

- Home Repair (https://www.diybanter.com/home-repair/)

- - Sand Wood Flooring (https://www.diybanter.com/home-repair/82026-sand-wood-flooring.html)

December 17th 04 04:20 PM

Sand Wood Flooring

Can any recommend a good sander to sand my wood interior steps? Or
should I just try and use a edger (which is alot bigger).

What about Drum Vs. Orb when doing the entire floor itself? Ive been
reading and every website uses one or the other.. The Orb appears to be
slower, but safer for a DIYer.

Thanks
-d

Duane Bozarth

December 17th 04 05:12 PM

" wrote:

Can any recommend a good sander to sand my wood interior steps? Or
should I just try and use a edger (which is alot bigger).

How many, what size, what type of flooring, new installation,
refinish,...???
For just short run, I've done well w/ 3x24 hand belt sander. It would
be slow for a grand staircase, however.

What about Drum Vs. Orb when doing the entire floor itself? Ive been
reading and every website uses one or the other.. The Orb appears to be
slower, but safer for a DIYer.

I'd agree unless you're a fairly experienced DIY'er. W/ either,
however, start off w/ lesser grit initially and practice in an
inconspicuous area to get the hang of it first, then go to it "in
anger"... :)

Chip C

December 17th 04 06:56 PM

wrote:
Can any recommend a good sander to sand my wood interior steps? Or
should I just try and use a edger (which is alot bigger).

What about Drum Vs. Orb when doing the entire floor itself? Ive been
reading and every website uses one or the other.. The Orb appears to
be
slower, but safer for a DIYer.

Thanks
-d

Having used both a drum and an orbital, I found the latter to be very
frustrating as the dust built up on the pad very quickly to the point
that it no longer had any bite. This is maybe less of a concern if
you're refinishing floors and don't need to take much thickness off,
but if you need to level old boards, I think you'd run into the same
problem.

I expect to favour the drum unit for future work. Though, Dang, it's a
lot heaver to lug up the stairs.
I haven't done stairs yet.

Chip C
Toronto

All times are GMT +1. The time now is 01:30 AM.