Home |
Search |
Today's Posts |
![]() |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]() |
|||
|
|||
![]() "Chris Perdue" wrote in message ... From: "ng_reader" Aware of spacers and such. Problem is, there's a door on the other side of said oven, so getting that door open might end up being a problem if the oven is over too far. understood....the dishwasher end panel comes standard at 3 inches...they can be ripped(trimmed) down to approximately one inch...the side is usualy 3/8 of an inch thick just as most (*stock factory built) cabinet sides....so the actual space taken up can be as little as 7/8 to one inch...the counter top *needs* support on the end...if not it shall sag and bow... ------------------- Chris Perdue "Sometimes you're the windshield, sometimes you're the bug!" Remove "PANTS" to e-mail OK Cool. Yeah, holding pattern right now as the Mrs. racks her brains. This is a very good group, wish I had time to read *all* the posts. Cheerio |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|