Proper way to hang your wrenches
 

This works very well. I did mine like this and it is a real time saver

https://imgur.com/gallery/IfzwMh3

Proper way to hang your wrenches
 

On 12/12/20 6:24 PM, Ed Pawlowski wrote:
This works very well.Â* I did mine like this and it is a real time saver

https://imgur.com/gallery/IfzwMh3

I'd like to see his Channel Lock and Vise Grip
tools.

Proper way to hang your wrenches
 

Ed Pawlowski writes:

This works very well. I did mine like this and it is a real time saver

https://imgur.com/gallery/IfzwMh3

Took a few seconds for it to sink in. LOL.

The board those wrenches are on is odd.
I just bought a peg board and it had the traditional
holes equally spaced. I'm not sure what that is.


--
Dan Espen

Proper way to hang your wrenches
 

On 12/12/20 6:58 PM, Dan Espen wrote:
Ed Pawlowski writes:

This works very well. I did mine like this and it is a real time saver

https://imgur.com/gallery/IfzwMh3

Took a few seconds for it to sink in. LOL.

The board those wrenches are on is odd.
I just bought a peg board and it had the traditional
holes equally spaced. I'm not sure what that is.


Is it some sort of strap iron rather than pegboard
type stuff?

Proper way to hang your wrenches
 

In alt.home.repair, on Sat, 12 Dec 2020 19:24:40 -0500, Ed Pawlowski
wrote:

This works very well. I did mine like this and it is a real time saver

https://imgur.com/gallery/IfzwMh3

I tried that but the dog knocked some of them off and I coudln't decide
which was which. Which was 18mm and which was 20, and so forth.

Proper way to hang your wrenches
 

On 12/12/20 8:12 PM, Dean Hoffman wrote:
On 12/12/20 6:58 PM, Dan Espen wrote:
Ed Pawlowski writes:

This works very well.Â* I did mine like this and it is a real time saver

https://imgur.com/gallery/IfzwMh3

Took a few seconds for it to sink in.Â* LOL.

The board those wrenches are on is odd.
I just bought a peg board and it had the traditional
holes equally spaced.Â* I'm not sure what that is.


Â*Â*Â*Â* Is it some sort of strap iron rather than pegboard
type stuff?

Probably a specially made slotted hole sheet, like these

https://www.marcospecialtysteel.com/...slotted-holes/

Proper way to hang your wrenches
 

writes:

On 12/12/20 8:12 PM, Dean Hoffman wrote:
On 12/12/20 6:58 PM, Dan Espen wrote:
Ed Pawlowski writes:

This works very well.Â* I did mine like this and it is a real time saver

https://imgur.com/gallery/IfzwMh3

Took a few seconds for it to sink in.Â* LOL.

The board those wrenches are on is odd.
I just bought a peg board and it had the traditional
holes equally spaced.Â* I'm not sure what that is.


Â*Â*Â*Â* Is it some sort of strap iron rather than pegboard
type stuff?

Probably a specially made slotted hole sheet, like these

https://www.marcospecialtysteel.com/...slotted-holes/

I thought it might be metal too.
It might be a display case.


--
Dan Espen

Proper way to hang your wrenches
 

On Sat, 12 Dec 2020 21:08:46 -0500, micky
wrote:

In alt.home.repair, on Sat, 12 Dec 2020 19:24:40 -0500, Ed Pawlowski
wrote:

This works very well. I did mine like this and it is a real time saver

https://imgur.com/gallery/IfzwMh3

I tried that but the dog knocked some of them off and I coudln't decide
which was which. Which was 18mm and which was 20, and so forth.

Don't mix up the SAE, Metrics and BSW or you will start stripping bolt
heads.

Proper way to hang your wrenches
 

On Sat, 12 Dec 2020 19:12:55 -0600, Dean Hoffman
wrote:

On 12/12/20 6:58 PM, Dan Espen wrote:
Ed Pawlowski writes:

This works very well. I did mine like this and it is a real time saver

https://imgur.com/gallery/IfzwMh3

Took a few seconds for it to sink in. LOL.

The board those wrenches are on is odd.
I just bought a peg board and it had the traditional
holes equally spaced. I'm not sure what that is.


Is it some sort of strap iron rather than pegboard
type stuff?
No, ot's just "pre-adjusted pegboard" to match the crescent wrenches
- - -