I have a Generac Model 0065512 Standby Generator and cannot find the
owner manual. Nor can I find a free web source for same. Anyone know
of one?

I don't know if mine is working right or not. I caled local dealer
who said he would come out to take a look. Promised twice - never
showed.

I suffered a brief outage recently - the lights blinked then came back
on. However my TVs had to be restarted manually. Same for my PC.
Would this be normal?

Thanks
xxxxx

On Tue, 03 Dec 2019 15:15:01 -0500, wrote:

I have a Generac Model 0065512 Standby Generator and cannot find the
owner manual. Nor can I find a free web source for same. Anyone know
of one?

I don't know if mine is working right or not. I caled local dealer
who said he would come out to take a look. Promised twice - never
showed.

I suffered a brief outage recently - the lights blinked then came back
on. However my TVs had to be restarted manually. Same for my PC.
Would this be normal?

Thanks
xxxxx
DEFINITELY normal, as the generator can not anticipate the outage and
start before the power goes out, nor can it switch quickly enough to
not reset MANY devices.

On Tuesday, December 3, 2019 at 5:18:58 PM UTC-5, Clare Snyder wrote:
On Tue, 03 Dec 2019 15:15:01 -0500, wrote:

I have a Generac Model 0065512 Standby Generator and cannot find the
owner manual. Nor can I find a free web source for same. Anyone know
of one?

I don't know if mine is working right or not. I caled local dealer
who said he would come out to take a look. Promised twice - never
showed.

I suffered a brief outage recently - the lights blinked then came back
on. However my TVs had to be restarted manually. Same for my PC.
Would this be normal?

Thanks
xxxxx
DEFINITELY normal, as the generator can not anticipate the outage and
start before the power goes out, nor can it switch quickly enough to
not reset MANY devices.

+1

They take some number of seconds to start up and get up to speed.
It's a generator, not a UPS. If that's the only issue, it's going to be
an expensive service call for nothing. Also these have self-test built-in
and normally run a test cycle once a week. Should have a code or something
set if something is wrong. Newer ones, I would think would have added
the ability to communicate via wifi to let you know too, but IDK, the
one I worked on was from over ten years ago.

On Tue, 3 Dec 2019 15:27:44 -0800 (PST), trader_4
wrote:

On Tuesday, December 3, 2019 at 5:18:58 PM UTC-5, Clare Snyder wrote:
On Tue, 03 Dec 2019 15:15:01 -0500, wrote:

I have a Generac Model 0065512 Standby Generator and cannot find the
owner manual. Nor can I find a free web source for same. Anyone know
of one?

I don't know if mine is working right or not. I caled local dealer
who said he would come out to take a look. Promised twice - never
showed.

I suffered a brief outage recently - the lights blinked then came back
on. However my TVs had to be restarted manually. Same for my PC.
Would this be normal?

Thanks
xxxxx
DEFINITELY normal, as the generator can not anticipate the outage and
start before the power goes out, nor can it switch quickly enough to
not reset MANY devices.

+1

They take some number of seconds to start up and get up to speed.
It's a generator, not a UPS. If that's the only issue, it's going to be
an expensive service call for nothing. Also these have self-test built-in
and normally run a test cycle once a week. Should have a code or something
set if something is wrong. Newer ones, I would think would have added
the ability to communicate via wifi to let you know too, but IDK, the
one I worked on was from over ten years ago.


My Generac is four years old. Just windered.
My bro in Maine (brrr) said his power went out but his TV did not. I
wasn't there! I was just curious.
Thanks
xxxxx

On Tuesday, December 3, 2019 at 7:03:28 PM UTC-5, wrote:
On Tue, 3 Dec 2019 15:27:44 -0800 (PST), trader_4
wrote:

On Tuesday, December 3, 2019 at 5:18:58 PM UTC-5, Clare Snyder wrote:
On Tue, 03 Dec 2019 15:15:01 -0500, wrote:

I have a Generac Model 0065512 Standby Generator and cannot find the
owner manual. Nor can I find a free web source for same. Anyone know
of one?

I don't know if mine is working right or not. I caled local dealer
who said he would come out to take a look. Promised twice - never
showed.

I suffered a brief outage recently - the lights blinked then came back
on. However my TVs had to be restarted manually. Same for my PC.
Would this be normal?

Thanks
xxxxx
DEFINITELY normal, as the generator can not anticipate the outage and
start before the power goes out, nor can it switch quickly enough to
not reset MANY devices.

+1

They take some number of seconds to start up and get up to speed.
It's a generator, not a UPS. If that's the only issue, it's going to be
an expensive service call for nothing. Also these have self-test built-in
and normally run a test cycle once a week. Should have a code or something
set if something is wrong. Newer ones, I would think would have added
the ability to communicate via wifi to let you know too, but IDK, the
one I worked on was from over ten years ago.


My Generac is four years old. Just windered.
My bro in Maine (brrr) said his power went out but his TV did not.

You should ask him what that means. Was he watching it at the time?
Maybe it went off briefly but then powered itself back up to where it
left off. Or it's on a UPS. Or he has some standby system that's a lot
better than all the other ones out there.


I
wasn't there! I was just curious.
Thanks
xxxxx

On 12/3/2019 5:18 PM, Clare Snyder wrote:
On Tue, 03 Dec 2019 15:15:01 -0500, wrote:

I have a Generac Model 0065512 Standby Generator and cannot find the
owner manual. Nor can I find a free web source for same. Anyone know
of one?

I don't know if mine is working right or not. I caled local dealer
who said he would come out to take a look. Promised twice - never
showed.

I suffered a brief outage recently - the lights blinked then came back
on. However my TVs had to be restarted manually. Same for my PC.
Would this be normal?

Thanks
xxxxx
DEFINITELY normal, as the generator can not anticipate the outage and
start before the power goes out, nor can it switch quickly enough to
not reset MANY devices.

Normal, but can be eliminated. I always hated the TV box taking forever
to reboot. I bought a $40 UPS battery unit and plug into that. No more
dropouts when the power goes out for a few seconds.

On Tue, 3 Dec 2019 19:00:05 -0500, Ed Pawlowski wrote:

On 12/3/2019 5:18 PM, Clare Snyder wrote:
On Tue, 03 Dec 2019 15:15:01 -0500, wrote:

I have a Generac Model 0065512 Standby Generator and cannot find the
owner manual. Nor can I find a free web source for same. Anyone know
of one?

I don't know if mine is working right or not. I caled local dealer
who said he would come out to take a look. Promised twice - never
showed.

I suffered a brief outage recently - the lights blinked then came back
on. However my TVs had to be restarted manually. Same for my PC.
Would this be normal?

Thanks
xxxxx
DEFINITELY normal, as the generator can not anticipate the outage and
start before the power goes out, nor can it switch quickly enough to
not reset MANY devices.

Normal, but can be eliminated. I always hated the TV box taking forever
to reboot. I bought a $40 UPS battery unit and plug into that. No more
dropouts when the power goes out for a few seconds.


Cud or shud use a UPS on my PC I guess. As it happened, I did lose
some data I had not saved.
Thanks
xxxxx

On Tue, 03 Dec 2019 19:07:22 -0500, wrote:

Cud or shud use a UPS on my PC I guess. As it happened, I did lose
some data I had not saved.
Thanks
xxxxx


I use UPS units on:
1) Computer, screen, and Comcast modem
2) DISH Network controller (so possible recording isn't stopped)
3) FM transmitter (broadcasts music from the computer throughout the
house.)
4) Second Dish unit in "tornado shelter" area in basement.

My Generac is set for 30 second delay before it fires up. The UPS's
prevent any losses during that time period.

-dan z-



--
Protect your civil rights!
Let the politicians know how you feel.
Join or donate to the NRA today!
http://membership.nrahq.org/default....ignid=XR014887

Gun control is like trying to reduce drunk driving by making it tougher for sober people to own cars.

On Tue, 3 Dec 2019 19:00:05 -0500, Ed Pawlowski wrote:

On 12/3/2019 5:18 PM, Clare Snyder wrote:
On Tue, 03 Dec 2019 15:15:01 -0500, wrote:

I have a Generac Model 0065512 Standby Generator and cannot find the
owner manual. Nor can I find a free web source for same. Anyone know
of one?

I don't know if mine is working right or not. I caled local dealer
who said he would come out to take a look. Promised twice - never
showed.

I suffered a brief outage recently - the lights blinked then came back
on. However my TVs had to be restarted manually. Same for my PC.
Would this be normal?

Thanks
xxxxx
DEFINITELY normal, as the generator can not anticipate the outage and
start before the power goes out, nor can it switch quickly enough to
not reset MANY devices.

Normal, but can be eliminated. I always hated the TV box taking forever
to reboot. I bought a $40 UPS battery unit and plug into that. No more
dropouts when the power goes out for a few seconds.
Likewize - but for my 50 inch plasma a $40 unit won't cut it - - - -
unless it's one I pick up used for $40 and have to spend another 60 or
more for batteries - - - -

On 12/3/2019 9:04 PM, Clare Snyder wrote:
On Tue, 3 Dec 2019 19:00:05 -0500, Ed Pawlowski wrote:

On 12/3/2019 5:18 PM, Clare Snyder wrote:
On Tue, 03 Dec 2019 15:15:01 -0500, wrote:

I have a Generac Model 0065512 Standby Generator and cannot find the
owner manual. Nor can I find a free web source for same. Anyone know
of one?

I don't know if mine is working right or not. I caled local dealer
who said he would come out to take a look. Promised twice - never
showed.

I suffered a brief outage recently - the lights blinked then came back
on. However my TVs had to be restarted manually. Same for my PC.
Would this be normal?

Thanks
xxxxx
DEFINITELY normal, as the generator can not anticipate the outage and
start before the power goes out, nor can it switch quickly enough to
not reset MANY devices.

Normal, but can be eliminated. I always hated the TV box taking forever
to reboot. I bought a $40 UPS battery unit and plug into that. No more
dropouts when the power goes out for a few seconds.
Likewize - but for my 50 inch plasma a $40 unit won't cut it - - - -
unless it's one I pick up used for $40 and have to spend another 60 or
more for batteries - - - -

Works well for the short time the power is out, often just seconds.
enough to screw up the box. I got it not so much for the TV but the
cable box that takes forever to get going again. If it is recording at
the time you'd lose that too.

Really, just think how horrid it would be for the TV to be out 5 or 10
minutes? Devastating, the whole family would become disoriented.

On Tue, 3 Dec 2019 21:31:18 -0500, Ed Pawlowski wrote:

On 12/3/2019 9:04 PM, Clare Snyder wrote:
On Tue, 3 Dec 2019 19:00:05 -0500, Ed Pawlowski wrote:

On 12/3/2019 5:18 PM, Clare Snyder wrote:
On Tue, 03 Dec 2019 15:15:01 -0500, wrote:

I have a Generac Model 0065512 Standby Generator and cannot find the
owner manual. Nor can I find a free web source for same. Anyone know
of one?

I don't know if mine is working right or not. I caled local dealer
who said he would come out to take a look. Promised twice - never
showed.

I suffered a brief outage recently - the lights blinked then came back
on. However my TVs had to be restarted manually. Same for my PC.
Would this be normal?

Thanks
xxxxx
DEFINITELY normal, as the generator can not anticipate the outage and
start before the power goes out, nor can it switch quickly enough to
not reset MANY devices.

Normal, but can be eliminated. I always hated the TV box taking forever
to reboot. I bought a $40 UPS battery unit and plug into that. No more
dropouts when the power goes out for a few seconds.
Likewize - but for my 50 inch plasma a $40 unit won't cut it - - - -
unless it's one I pick up used for $40 and have to spend another 60 or
more for batteries - - - -

Works well for the short time the power is out, often just seconds.
enough to screw up the box. I got it not so much for the TV but the
cable box that takes forever to get going again. If it is recording at
the time you'd lose that too.

Really, just think how horrid it would be for the TV to be out 5 or 10
minutes? Devastating, the whole family would become disoriented.
The battery on my Sola 450 on the downstairs TV just went south so
it's riding bareback at the moment. I've got 2 3KV units inthe garage
but not enough room in the entertainment unit and no 30 amp outlet in
the basement.

On Tue, 03 Dec 2019 21:04:05 -0500, Clare Snyder
wrote:

On Tue, 3 Dec 2019 19:00:05 -0500, Ed Pawlowski wrote:

On 12/3/2019 5:18 PM, Clare Snyder wrote:
On Tue, 03 Dec 2019 15:15:01 -0500, wrote:

I have a Generac Model 0065512 Standby Generator and cannot find the
owner manual. Nor can I find a free web source for same. Anyone know
of one?

I don't know if mine is working right or not. I caled local dealer
who said he would come out to take a look. Promised twice - never
showed.

I suffered a brief outage recently - the lights blinked then came back
on. However my TVs had to be restarted manually. Same for my PC.
Would this be normal?

Thanks
xxxxx
DEFINITELY normal, as the generator can not anticipate the outage and
start before the power goes out, nor can it switch quickly enough to
not reset MANY devices.

Normal, but can be eliminated. I always hated the TV box taking forever
to reboot. I bought a $40 UPS battery unit and plug into that. No more
dropouts when the power goes out for a few seconds.
Likewize - but for my 50 inch plasma a $40 unit won't cut it - - - -
unless it's one I pick up used for $40 and have to spend another 60 or
more for batteries - - - -

You can usually find a UPS with bad batteries for free. That is where
all of mine came from. Shop around on the net for batteries.

On Tue, 03 Dec 2019 17:18:54 -0500, Clare Snyder
wrote:

On Tue, 03 Dec 2019 15:15:01 -0500, wrote:

I have a Generac Model 0065512 Standby Generator and cannot find the
owner manual. Nor can I find a free web source for same. Anyone know
of one?

I don't know if mine is working right or not. I caled local dealer
who said he would come out to take a look. Promised twice - never
showed.

I suffered a brief outage recently - the lights blinked then came back
on. However my TVs had to be restarted manually. Same for my PC.
Would this be normal?

Thanks
xxxxx
DEFINITELY normal, as the generator can not anticipate the outage and
start before the power goes out, nor can it switch quickly enough to
not reset MANY devices.

ok
thanks
xxxxx

On Tue, 03 Dec 2019 17:18:54 -0500, Clare Snyder
wrote:

On Tue, 03 Dec 2019 15:15:01 -0500, wrote:

I have a Generac Model 0065512 Standby Generator and cannot find the
owner manual. Nor can I find a free web source for same. Anyone know
of one?

I don't know if mine is working right or not. I caled local dealer
who said he would come out to take a look. Promised twice - never
showed.

I suffered a brief outage recently - the lights blinked then came back
on. However my TVs had to be restarted manually. Same for my PC.
Would this be normal?

Thanks
xxxxx
DEFINITELY normal, as the generator can not anticipate the outage and
start before the power goes out, nor can it switch quickly enough to
not reset MANY devices.

As Clare says, that is perfectly normal. You can avoid it by getting a
small UPS that will hold the power until your generator kicks in. I
have one on my TV and one on each of my "always on" computers .

On 12/3/19 6:15 PM, wrote:

[snip]

As Clare says, that is perfectly normal. You can avoid it by getting a
small UPS that will hold the power until your generator kicks in. I
have one on my TV and one on each of my "always on" computers .

I had trouble* with one computer during a recent outage. The other 2
were on UPSes and had no problems. You do need to replace UPS batteries
every few years.

* It was just the power supply, which was a lot easier to replace than
the whole PC.

--
21 days until the winter celebration (Wed, Dec 25, 2019 12:00:00 AM for
1 day).

Mark Lloyd
http://notstupid.us/

"Being unable to reason is not a positive character trait outside
religion." [Dewey Henize]

In article ,
wrote:

I have a Generac Model 0065512 Standby Generator and cannot find the
owner manual. Nor can I find a free web source for same. Anyone know
of one?

Xxxxx-

Do a Google Search for generac 0065512. There appears to be
considerable free information available at the Generac and other web
sites. I assume your 0065512 is the same as a Generac G0065512.

Fred

On 12/3/19 2:15 PM, wrote:

[snip]

I suffered a brief outage recently - the lights blinked then came back
on. However my TVs had to be restarted manually. Same for my PC.
Would this be normal?

Thanks
xxxxx

A lot of modern devices with electronics suffer from "power amnesia",
where a power outage leads to devices forgetting they're supposed to be
on. Many TVs have that problem (often smaller ones don't). Computers do,
but many allow normal "power" function with a setup option.

--
21 days until the winter celebration (Wed, Dec 25, 2019 12:00:00 AM for
1 day).

Mark Lloyd
http://notstupid.us/

"Being unable to reason is not a positive character trait outside
religion." [Dewey Henize]

On 12/4/2019 11:56 AM, Mark Lloyd wrote:
On 12/3/19 2:15 PM, wrote:

[snip]

I suffered a brief outage recently - the lights blinked then came back
on.Â*Â* However my TVs had to be restarted manually.Â* Same for my PC.
Would this be normal?

Thanks
xxxxx

A lot of modern devices with electronics suffer from "power amnesia",
where a power outage leads to devices forgetting they're supposed to
be on. Many TVs have that problem (often smaller ones don't).
Computers do, but many allow normal "power" function with a setup option.


Â* There is usually a setting in the BIOS (may not apply to W10
machines) that allows you to choose auto-reboot or not . I set mine all
on no-reboot , out here we can get multiple short outages in a brief time .

--
Snag
Yes , I'm old
and crochety - and armed .
Get outta my woods !

On Wednesday, December 4, 2019 at 2:18:10 PM UTC-5, Terry Coombs wrote:
On 12/4/2019 11:56 AM, Mark Lloyd wrote:
On 12/3/19 2:15 PM, wrote:

[snip]

I suffered a brief outage recently - the lights blinked then came back
on.Â*Â* However my TVs had to be restarted manually.Â* Same for my PC.
Would this be normal?

Thanks
xxxxx

A lot of modern devices with electronics suffer from "power amnesia",
where a power outage leads to devices forgetting they're supposed to
be on. Many TVs have that problem (often smaller ones don't).
Computers do, but many allow normal "power" function with a setup option.

On Wed, 4 Dec 2019 12:07:01 -0800 (PST), trader_4
wrote:

On Wednesday, December 4, 2019 at 2:18:10 PM UTC-5, Terry Coombs wrote:
On 12/4/2019 11:56 AM, Mark Lloyd wrote:
On 12/3/19 2:15 PM, wrote:

[snip]

I suffered a brief outage recently - the lights blinked then came back
on.Â*Â* However my TVs had to be restarted manually.Â* Same for my PC.
Would this be normal?

Thanks
xxxxx

A lot of modern devices with electronics suffer from "power amnesia",
where a power outage leads to devices forgetting they're supposed to
be on. Many TVs have that problem (often smaller ones don't).
Computers do, but many allow normal "power" function with a setup option.


Â* There is usually a setting in the BIOS (may not apply to W10
machines) that allows you to choose auto-reboot or not . I set mine all
on no-reboot , out here we can get multiple short outages in a brief time .

--
Snag
Yes , I'm old
and crochety - and armed .
Get outta my woods !

Interesting, I never knew there was a setting, but it;s a good idea and
makes sense. For a typical PC I would not want it to reboot. If it's
an office PC that has to be used often or one for some dedicated application,
then having it power back up could make sense. I can't say I've paid close
attention, but if I had to guess, I think the ones here have been set to
stay off.

It is in the BIOS power settings and the OS is irrelevant. It is
really just whether the machine powers back on after a power failure
or stays off until you manually power it back on. It may just revert
to the state it was in when you lost power. Back before that was an
option I used to use a 12v relay with the N/C point going to the power
button. It will hold the power on line active until the 12v supply
comes up. All of my media and MP3 players come up after a power
failure.

My MP3 players always came up and down with the power even my current
W/7 machines and other than that nag screen, they seem fine with it.
In XP/W95-8 you could turn the nagger off. I haven't found it in 7 but
I am sure it is there somewhere.