Ibought a wall elec fireplace.
 

Need a way to conceal cord. The cord is 72 inches. I can conceal with basic conealers but have a 2 foot section that cannot. Do I cut the cord to fit? 12 amp 1500 watt.

Ibought a wall elec fireplace.
 

On Tue, 12 Nov 2019 14:47:59 -0800 (PST), Thomas
wrote:

Need a way to conceal cord. The cord is 72 inches. I can conceal with basic conealers but have a 2 foot section that cannot. Do I cut the cord to fit? 12 amp 1500 watt.

That probably should be on a dedicated circuit and if you are doing
that you could put the receptacle behind the fireplace as long as it
can be removed for service.
Other than that I think we need more information. If you cut the cord
and put a plug on it, you have voided the listing (technically) but
the U/L police are not going to batter ram your door at 5 AM over it.

Ibought a wall elec fireplace.
 

In alt.home.repair, on Tue, 12 Nov 2019 14:47:59 -0800 (PST), Thomas
wrote:

Need a way to conceal cord. The cord is 72 inches. I can conceal with basic conealers but have a 2 foot section that cannot. Do I cut the cord to fit? 12 amp 1500 watt.

Maybe you can cut off the plug, drill a hole in the floor and plug it in
in the basement.

Just today by coincidence, I finally got visual cable?? whatever it's
called, and the second floor has an overhang, so I drilled a hole into
the 2nd floor floor where the overhang meets the first floor outside
wall. It went up into the spare bedroom and came out under the bed.

Ibought a wall elec fireplace.
 

Should have mentioned it is wall mounted, about 6 feet up on center.

Ibought a wall elec fireplace.
 

On Wed, 13 Nov 2019 11:52:20 -0800 (PST), Thomas
wrote:

Should have mentioned it is wall mounted, about 6 feet up on center.

What is behind it? I know my Dimco is about 12" deep. Can you get to
power from the other side?