DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Baldwin DBL Deadbolt???? (https://www.diybanter.com/home-repair/63735-baldwin-dbl-deadbolt.html)

cm August 4th 04 03:29 AM

Baldwin DBL Deadbolt????
 
How do I disasemble a Baldwin double deadbolt for re-keying. There are no
screws visible to remove it from the door? What else do I need to know about
after removing it from the door?

THX,

AZCRAIG



Red Neckerson August 4th 04 04:15 AM

Baldwin DBL Deadbolt????
 

"cm" wrote

How do I disasemble a Baldwin double deadbolt for re-keying.


How in the hell would we know?

Why don't you ask Alec, Daniel, William or (God forbid) Stephen........



L. M. Rappaport August 4th 04 02:57 PM

Baldwin DBL Deadbolt????
 
On Wed, 04 Aug 2004 02:29:55 GMT, "cm"
wrote (with possible editing):

How do I disasemble a Baldwin double deadbolt for re-keying. There are no
screws visible to remove it from the door? What else do I need to know about
after removing it from the door?

THX,

AZCRAIG


As I recall, there is a cylinder release under the cover which is on
the edge of the door. You put a key in the lock (I believe it is
always the outside even if it's two cylinders), remove the plate,
loosen the screw and then the cylinder will unscrew.

I haven't done this in a long time, but that's what I recall.

--

Larry


Mzone719 August 4th 04 06:32 PM

Baldwin DBL Deadbolt????
 
Most commonly on Baldwin, The two screws that hold the lock together are hidden
underneath the interior faceplate. That faceplate needs to be picked off with
a small flat blade screwdriver or such, and then underneath that you will see
the two screws.

Douglas Johnson August 4th 04 07:13 PM

Baldwin DBL Deadbolt????
 

On Wed, 04 Aug 2004 02:29:55 GMT, "cm"
wrote (with possible editing):

How do I disasemble a Baldwin double deadbolt for re-keying. There are no
screws visible to remove it from the door? What else do I need to know about
after removing it from the door?


I just checked ours. The whole collar around the lock on the inside of the door
unscrews. I don't think there is anything complex after that.

-- Doug

cm August 5th 04 06:12 PM

Baldwin DBL Deadbolt????
 
Doug,

Thanks you were correct about the ring screwing off revealing the screws.

Thanks again,

CraigM


"Douglas Johnson" wrote in message
...

On Wed, 04 Aug 2004 02:29:55 GMT, "cm"
wrote (with possible editing):

How do I disasemble a Baldwin double deadbolt for re-keying. There are

no
screws visible to remove it from the door? What else do I need to know

about
after removing it from the door?


I just checked ours. The whole collar around the lock on the inside of

the door
unscrews. I don't think there is anything complex after that.

-- Doug





All times are GMT +1. The time now is 10:47 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter