DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Ping Kenk (https://www.diybanter.com/home-repair/597525-re-ping-kenk.html)

KenK September 29th 17 07:03 PM

Ping Kenk
 
Stormin' Norman wrote in
:

On 26 Sep 2017 18:18:12 GMT, KenK wrote:


You are correct. I didn't mention Yuma. Normally I don't mention my
location other than SW AZ. Perhaps I'm much too cautious,


Ken, what really matters is, have you gotten your oven taken care of
yet?



No. Getting by with convection setting on microwave. Not very good.
Fortunately I don't use oven much. Still can't decide what to do. Call
repair shop - all have terrible reviews on-line. By a used one? Buy a new
one?


--
I love a good meal! That's why I don't cook.







Oren[_2_] September 29th 17 07:20 PM

Ping Kenk
 
On Fri, 29 Sep 2017 18:09:49 +0000, Stormin' Norman
wrote:

On 29 Sep 2017 18:03:01 GMT, KenK wrote:

Stormin' Norman wrote in
m:

On 26 Sep 2017 18:18:12 GMT, KenK wrote:


You are correct. I didn't mention Yuma. Normally I don't mention my
location other than SW AZ. Perhaps I'm much too cautious,

Ken, what really matters is, have you gotten your oven taken care of
yet?



No. Getting by with convection setting on microwave. Not very good.
Fortunately I don't use oven much. Still can't decide what to do. Call
repair shop - all have terrible reviews on-line. By a used one? Buy a new
one?



According to Yelp, Mayday appliance repair in Yuma gets tremendous,
five star reviews from a lot of their customers.

See:

https://www.yelp.com/biz/mayday-appl...pliance+repair

Can't hurt to call and talk to the guy, can it?


Ken, The link may be your best choice. There a few recent reviews from
Yuma. Contact them by phone.

_Mayday Appliance Llc_

3300 S 8th Ave
Yuma, AZ 85365

Phone number (928) 341-4000

Tell us what they say. Do they have a display room you can visit in
case you need a newer oven?

KenK October 2nd 17 02:57 PM

Ping Kenk
 
Stormin' Norman wrote in
:

On 29 Sep 2017 18:03:01 GMT, KenK wrote:

Stormin' Norman wrote in
m:

On 26 Sep 2017 18:18:12 GMT, KenK wrote:


You are correct. I didn't mention Yuma. Normally I don't mention my
location other than SW AZ. Perhaps I'm much too cautious,

Ken, what really matters is, have you gotten your oven taken care of
yet?



No. Getting by with convection setting on microwave. Not very good.
Fortunately I don't use oven much. Still can't decide what to do. Call
repair shop - all have terrible reviews on-line. By a used one? Buy a
new one?



According to Yelp, Mayday appliance repair in Yuma gets tremendous,
five star reviews from a lot of their customers.

See:

https://www.yelp.com/biz/mayday-appl...pliance+repair

Can't hurt to call and talk to the guy, can it?



Thanks much for the tip. Sounds like my solution. I'm currently booked up
with medical stuff but I'll try to get to it Wednesday.


--
I love a good meal! That's why I don't cook.







Mr. 2 Cents[_2_] October 2nd 17 03:38 PM

Ping Kenk
 
On 2 Oct 2017 13:57:26 GMT, KenK wrote:

Stormin' Norman wrote in
:

On 29 Sep 2017 18:03:01 GMT, KenK wrote:

Stormin' Norman wrote in
:

On 26 Sep 2017 18:18:12 GMT, KenK wrote:


You are correct. I didn't mention Yuma. Normally I don't mention my
location other than SW AZ. Perhaps I'm much too cautious,

Ken, what really matters is, have you gotten your oven taken care of
yet?



No. Getting by with convection setting on microwave. Not very good.
Fortunately I don't use oven much. Still can't decide what to do. Call
repair shop - all have terrible reviews on-line. By a used one? Buy a
new one?



According to Yelp, Mayday appliance repair in Yuma gets tremendous,
five star reviews from a lot of their customers.

See:

https://www.yelp.com/biz/mayday-appl...pliance+repair

Can't hurt to call and talk to the guy, can it?



Thanks much for the tip. Sounds like my solution. I'm currently booked up
with medical stuff but I'll try to get to it Wednesday.


You're welcome Ken. Good luck, please let me know how you make out
with the oven.

--
MAGA

"MORONS ARE GOVERNING AMERICA"

KenK October 4th 17 07:08 PM

Ping Kenk
 
KenK wrote in
:

Thanks much for the tip. Sounds like my solution. I'm currently booked
up with medical stuff but I'll try to get to it Wednesday.


Sent them a letter this morning. Couldn't find an email address. My hearing
is not good and I prefer written communication if available.


--
I love a good meal! That's why I don't cook.







KenK October 10th 17 07:10 PM

Ping Kenk
 
KenK wrote in
:

KenK wrote in
:

Thanks much for the tip. Sounds like my solution. I'm currently
booked up with medical stuff but I'll try to get to it Wednesday.


Sent them a letter this morning. Couldn't find an email address. My
hearing is not good and I prefer written communication if available.



Been six days today. No response - mail, telephone or email. Wonder why?
About ready to try Angie's List or HomeAdvisor or whatever. Seems like a
simple easy to fx problem. Likely a shorted bypass capacitor or something
simple like that. Too bad I can't pull out the oven amd look myself.


--
I love a good meal! That's why I don't cook.







KenK October 11th 17 02:58 PM

Ping Kenk
 
KenK wrote in
:

KenK wrote in
:

KenK wrote in
:

Thanks much for the tip. Sounds like my solution. I'm currently
booked up with medical stuff but I'll try to get to it Wednesday.


Sent them a letter this morning. Couldn't find an email address. My
hearing is not good and I prefer written communication if available.



Been six days today. No response - mail, telephone or email. Wonder
why? About ready to try Angie's List or HomeAdvisor or whatever. Seems
like a simple easy to fx problem. Likely a shorted bypass capacitor or
something simple like that. Too bad I can't pull out the oven amd look
myself.



The 3300 address was wrong. Letter was returned. Evidently they left no
forwarding address. Found another on 20th St. in a newer telephone book.
Will try that today. Hope it works. Sure would like to get the ovem
fixed!


--
I love a good meal! That's why I don't cook.







KenK October 16th 17 06:47 PM

Ping Kenk
 
KenK wrote in
:

KenK wrote in
:

KenK wrote in
:

KenK wrote in
:

Thanks much for the tip. Sounds like my solution. I'm currently
booked up with medical stuff but I'll try to get to it Wednesday.


Sent them a letter this morning. Couldn't find an email address. My
hearing is not good and I prefer written communication if available.



Been six days today. No response - mail, telephone or email. Wonder
why? About ready to try Angie's List or HomeAdvisor or whatever.
Seems like a simple easy to fx problem. Likely a shorted bypass
capacitor or something simple like that. Too bad I can't pull out the
oven amd look myself.



The 3300 address was wrong. Letter was returned. Evidently they left
no forwarding address. Found another on 20th St. in a newer telephone
book. Will try that today. Hope it works. Sure would like to get the
ovem fixed!


Still no response. Anyone know of another good appliance repair shop
here? Will have to try Google again I guess.



--
I love a good meal! That's why I don't cook.







[email protected] October 16th 17 11:06 PM

Ping Kenk
 
snips


Still no response. Anyone know of another good
appliance repair shop here?
Will have to try Google again I guess.



Good luck with google - finding local appliance repair.
Better to ask a few reputable local appliance sales
people. or maybe a local appliance parts person ..
John T.



KenK October 20th 17 05:58 PM

Ping Kenk
 
KenK wrote in news:XnsA8106DCA3AA11invalidcom@
130.133.4.11:

KenK wrote in
:

KenK wrote in
:

KenK wrote in
:

KenK wrote in
:

Thanks much for the tip. Sounds like my solution. I'm currently
booked up with medical stuff but I'll try to get to it Wednesday.


Sent them a letter this morning. Couldn't find an email address. My
hearing is not good and I prefer written communication if available.



Been six days today. No response - mail, telephone or email. Wonder
why? About ready to try Angie's List or HomeAdvisor or whatever.
Seems like a simple easy to fx problem. Likely a shorted bypass
capacitor or something simple like that. Too bad I can't pull out the
oven amd look myself.



The 3300 address was wrong. Letter was returned. Evidently they left
no forwarding address. Found another on 20th St. in a newer telephone
book. Will try that today. Hope it works. Sure would like to get the
ovem fixed!


Still no response. Anyone know of another good appliance repair shop
here? Will have to try Google again I guess.



A glimmer of hope! I got a call yesterday afternoon. They promised to
come today. We will see. I've had businesses tell me this before and
never show up.


--
I love a good meal! That's why I don't cook.







KenK October 21st 17 06:19 PM

Ping Kenk
 
KenK wrote in news:XnsA814657A4C0F1invalidcom@
130.133.4.11:

KenK wrote in news:XnsA8106DCA3AA11invalidcom@
130.133.4.11:

KenK wrote in
:

KenK wrote in
:

KenK wrote in
:

KenK wrote in
:

Thanks much for the tip. Sounds like my solution. I'm currently
booked up with medical stuff but I'll try to get to it Wednesday.


Sent them a letter this morning. Couldn't find an email address. My
hearing is not good and I prefer written communication if

available.



Been six days today. No response - mail, telephone or email. Wonder
why? About ready to try Angie's List or HomeAdvisor or whatever.
Seems like a simple easy to fx problem. Likely a shorted bypass
capacitor or something simple like that. Too bad I can't pull out

the
oven amd look myself.



The 3300 address was wrong. Letter was returned. Evidently they left
no forwarding address. Found another on 20th St. in a newer

telephone
book. Will try that today. Hope it works. Sure would like to get the
ovem fixed!


Still no response. Anyone know of another good appliance repair shop
here? Will have to try Google again I guess.



A glimmer of hope! I got a call yesterday afternoon. They promised to
come today. We will see. I've had businesses tell me this before and
never show up.


He didn't show up. Or call. sigh



--
I love a good meal! That's why I don't cook.








All times are GMT +1. The time now is 03:53 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter