Skillsaw - blade won't turn if nut tightened but won't cut if even loosened slightly
I have a B&D skill saw and the blade won't turn if nut tightened but won't cut
if even loosened slightly. Just here the motor shaft spinning and the blade stays still braced against the wood. I have the blade installed correctly and it is the right size at 7.25 inches. What might be the issue? Motor starting to fail? -- for full context, visit https://www.homeownershub.com/mainte...i-1140614-.htm |
Skillsaw - blade won't turn if nut tightened but won't cut if even loosened slightly
replying to Corey, Grampy wrote:
are you possibly missing a washer or spacer ? -- for full context, visit https://www.homeownershub.com/mainte...i-1140614-.htm |
Skillsaw - blade won't turn if nut tightened but won't cut ifeven loosened slightly
On Thursday, August 10, 2017 at 4:44:07 PM UTC-4, Corey wrote:
I have a B&D skill saw You have a B&D *circular* saw. Skilsaw (one word, one l) is the trademarked name for a line of saws made by Skil. and the blade won't turn if nut tightened but won't cut if even loosened slightly. Just here the motor shaft spinning and the blade stays still braced against the wood. What happens if the blade is not braced against the wood? Does it spin when the saw is started? What happens when you spin the blade by hand? Can you hear/feel the motor spinning along with it or does it spin freely on the shaft? I have the blade installed correctly and it is the right size at 7.25 inches. Did you recently change the blade? Has it ever worked with the blade that is now giving you trouble? Is the arbor hole size correct? Do you leave the blade washer off? See he https://www.amazon.com/DeWalt-Replac.../dp/B00AEVZ3F2 What might be the issue? Motor starting to fail? |
All times are GMT +1. The time now is 02:41 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter