Dishwasher Water Level Problem
There's probably a float valve which is stuck in the down position. Just a
guess. "ZestComputers" wrote in message ... Hi, I've got a D.e.f.y Dishmaid Dishwasher. It has recently stopped filling up sufficiently with water. The water level barely reaches the base of the element, let alone covers it. I've checked in the inlet hose and there's no blockage there and I can't find any blockages anywhere else. Could anyone give some advice on what could be causing the water level to only reach a low level and then stop, and/or how to fix it? Regards, Benjamin Gardiner |
Dishwasher Water Level Problem
Where would I find the float valve? And what would it look like?
-- Benjamin Gardiner "mkochsch" wrote in message news:UkfWb.467401$ts4.355291@pd7tw3no... There's probably a float valve which is stuck in the down position. Just a guess. "ZestComputers" wrote in message ... Hi, I've got a D.e.f.y Dishmaid Dishwasher. It has recently stopped filling up sufficiently with water. The water level barely reaches the base of the element, let alone covers it. I've checked in the inlet hose and there's no blockage there and I can't find any blockages anywhere else. Could anyone give some advice on what could be causing the water level to only reach a low level and then stop, and/or how to fix it? Regards, Benjamin Gardiner |
Dishwasher Water Level Problem
generally they look like a small can in one of the corners of the DW. It
lifts off and the switch is underneath. If it is floating free, then the switch itself may be bad. Also check for a "light load" setting of some sort that got turned on in error. My DW has one, but I don't know that it reduces the water level, rather it only shortens the wash cycle. Your's may be different. "ZestComputers" wrote in message ... Where would I find the float valve? And what would it look like? -- Benjamin Gardiner "mkochsch" wrote in message news:UkfWb.467401$ts4.355291@pd7tw3no... There's probably a float valve which is stuck in the down position. Just a guess. "ZestComputers" wrote in message ... Hi, I've got a D.e.f.y Dishmaid Dishwasher. It has recently stopped filling up sufficiently with water. The water level barely reaches the base of the element, let alone covers it. I've checked in the inlet hose and there's no blockage there and I can't find any blockages anywhere else. Could anyone give some advice on what could be causing the water level to only reach a low level and then stop, and/or how to fix it? Regards, Benjamin Gardiner |
All times are GMT +1. The time now is 03:00 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter