DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   How to turn 'cold room' in basement to living space? (https://www.diybanter.com/home-repair/54016-how-turn-cold-room-basement-living-space.html)

ississauga January 28th 04 03:49 AM

How to turn 'cold room' in basement to living space?
 
In my cold room is a 4 inch diameter hole which I assume is there only
to let in the (cold) air. Is that the only thing that differentiates
the cold room from the rest of the basement? I dont notice anything
else.

I have finished the rest of the basement, so to finish the cold room
do I just finish it in the same way or are there special things to
take care of? How do I close the 4 inch hole and do I close it from
both inside and out?

m Ransley January 28th 04 04:57 AM

How to turn 'cold room' in basement to living space?
 
Why would anyone have a hole in the wall and need to ask why and if and
how to seal it,
Im lost. So yes seal the hole


HeatMan January 28th 04 12:14 PM

How to turn 'cold room' in basement to living space?
 
It may be a combustion air inlet for the fossil fuel burning appliances.

It could also be where the dryer vent used to go.....

"m Ransley" wrote in message
...
Why would anyone have a hole in the wall and need to ask why and if and
how to seal it,
Im lost. So yes seal the hole




indago January 28th 04 02:11 PM

How to turn 'cold room' in basement to living space?
 
040127 2249 - ississauga wrote:

In my cold room is a 4 inch diameter hole which I assume is there only
to let in the (cold) air. Is that the only thing that differentiates
the cold room from the rest of the basement? I dont notice anything
else.

I have finished the rest of the basement, so to finish the cold room
do I just finish it in the same way or are there special things to
take care of? How do I close the 4 inch hole and do I close it from
both inside and out?


Yes...


someonesimple January 29th 04 12:36 AM

How to turn 'cold room' in basement to living space?
 

"ississauga" wrote in message
om...
In my cold room is a 4 inch diameter hole which I assume is there only
to let in the (cold) air. Is that the only thing that differentiates
the cold room from the rest of the basement? I dont notice anything
else.

I have finished the rest of the basement, so to finish the cold room
do I just finish it in the same way or are there special things to
take care of? How do I close the 4 inch hole and do I close it from
both inside and out?


There are other things that differentiate this cold room from the rest of
the basement. Most importantly, the other areas aren't cold.

You can't close the hole. It's likely required by the Federal Endangered
Species Act to allow the Medium Gray Pigmy Ground Owl access to historic
nesting sites. Someone in Lubbock Tx was just fined $70,000 recently for
doing the same thing. Check the federal fish and wildlife internet site to
read the article. It was really brutal.





All times are GMT +1. The time now is 05:05 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter