Lawn sprinkler question
I have a line of about 5 heads. The ones farthest away from the valve
are working perfectly. The 3 closest to valve only go part way up and if I manually pull them up, they often stay up even after the water is turned off. The farther ones working would tend to argue against pressure issues. Does it seem the best idea to just replace those three or is there some other diagnostic trick I should try first? |
Lawn sprinkler question
On Monday, May 30, 2016 at 12:55:32 PM UTC-4, Kurt V. Ullman wrote:
I have a line of about 5 heads. The ones farthest away from the valve are working perfectly. The 3 closest to valve only go part way up and if I manually pull them up, they often stay up even after the water is turned off. The farther ones working would tend to argue against pressure issues. Does it seem the best idea to just replace those three or is there some other diagnostic trick I should try first? Try spraying them with some silicone lube, while they are full up. |
Lawn sprinkler question
On Mon, 30 May 2016 12:55:27 -0400, "Kurt V. Ullman"
wrote: I have a line of about 5 heads. The ones farthest away from the valve are working perfectly. The 3 closest to valve only go part way up and if I manually pull them up, they often stay up even after the water is turned off. The farther ones working would tend to argue against pressure issues. Does it seem the best idea to just replace those three or is there some other diagnostic trick I should try first? I'd pull the spray tip off first, and inspect the plastic cone type filter. Remove those three, the cone and run the zone to flush out any debris, grit or pebbles. Later, consider replacing the three pop-ups, the springs have worn out. Salvage some parts for future adventures G. |
Lawn sprinkler question
On 5/30/2016 9:55 AM, Kurt V. Ullman wrote:
I have a line of about 5 heads. The ones farthest away from the valve are working perfectly. The 3 closest to valve only go part way up and if I manually pull them up, they often stay up even after the water is turned off. The farther ones working would tend to argue against pressure issues. Does it seem the best idea to just replace those three or is there some other diagnostic trick I should try first? Swap them. See if the problem moves with the heads or follows the location. |
Lawn sprinkler question
On Mon, 30 May 2016 10:19:05 -0700 (PDT), trader_4
wrote: Try spraying them with some silicone lube, while they are full up. +1 Reduce the friction. Yet, sprinkler pop-ups wear out (often the spring). |
Lawn sprinkler question
On Mon, 30 May 2016 12:55:27 -0400, "Kurt V. Ullman"
wrote: I have a line of about 5 heads. The ones farthest away from the valve are working perfectly. The 3 closest to valve only go part way up and if I manually pull them up, they often stay up even after the water is turned off. The farther ones working would tend to argue against pressure issues. Does it seem the best idea to just replace those three or is there some other diagnostic trick I should try first? Replace one and if that fixes it, replace the other two. |
Lawn sprinkler question
On Mon, 30 May 2016 12:55:27 -0400, "Kurt V. Ullman"
wrote: I have a line of about 5 heads. The ones farthest away from the valve are working perfectly. The 3 closest to valve only go part way up and if I manually pull them up, they often stay up even after the water is turned off. The farther ones working would tend to argue against pressure issues. Does it seem the best idea to just replace those three or is there some other diagnostic trick I should try first? Save the old ones in case I'm wrong. Maybe they can be cleaned, although I guess if so, you should do that before buying new ones. Not that I've ever cleaned one, but dirt is the biggest problem for almost anything mechanical. |
Lawn sprinkler question
On 5/30/16 1:24 PM, Oren wrote:
On Mon, 30 May 2016 12:55:27 -0400, "Kurt V. Ullman" wrote: I'd pull the spray tip off first, and inspect the plastic cone type filter. Remove those three, the cone and run the zone to flush out any debris, grit or pebbles. I have already done that. Sorry forgot t tell you. Later, consider replacing the three pop-ups, the springs have worn out. Salvage some parts for future adventures G. |
Lawn sprinkler question
Kurt V. Ullman wrote:
I have a line of about 5 heads. The ones farthest away from the valve are working perfectly. The 3 closest to valve only go part way up and if I manually pull them up, they often stay up even after the water is turned off. The farther ones working would tend to argue against pressure issues. Does it seem the best idea to just replace those three or is there some other diagnostic trick I should try first? Take them apart and clean them out. Buy new if they still don't pop up. |
Lawn sprinkler question
On 5/30/16 3:33 PM, dadiOH wrote:
Kurt V. Ullman wrote: I have a line of about 5 heads. The ones farthest away from the valve are working perfectly. The 3 closest to valve only go part way up and if I manually pull them up, they often stay up even after the water is turned off. The farther ones working would tend to argue against pressure issues. Does it seem the best idea to just replace those three or is there some other diagnostic trick I should try first? Take them apart and clean them out. Buy new if they still don't pop up. For $5-6 bucks each it seems just as easy to and probably quicker to just get new. Wouldn't I have to dig them out and take them off the line to take them apart and clean them? (Serious question, BTW) |
Lawn sprinkler question
Kurt V. Ullman wrote:
On 5/30/16 3:33 PM, dadiOH wrote: Kurt V. Ullman wrote: I have a line of about 5 heads. The ones farthest away from the valve are working perfectly. The 3 closest to valve only go part way up and if I manually pull them up, they often stay up even after the water is turned off. The farther ones working would tend to argue against pressure issues. Does it seem the best idea to just replace those three or is there some other diagnostic trick I should try first? Take them apart and clean them out. Buy new if they still don't pop up. For $5-6 bucks each it seems just as easy to and probably quicker to just get new. Wouldn't I have to dig them out and take them off the line to take them apart and clean them? (Serious question, BTW) On mine, the head unscrews...pull it up, unscrew head. |
Lawn sprinkler question
On 5/30/2016 9:55 AM, Kurt V. Ullman wrote:
I have a line of about 5 heads. The ones farthest away from the valve are working perfectly. The 3 closest to valve only go part way up and if I manually pull them up, they often stay up even after the water is turned off. The farther ones working would tend to argue against pressure issues. Does it seem the best idea to just replace those three or is there some other diagnostic trick I should try first? When mine start sticking, I pull out the grass blocking their movement. Then turn on the water, and repeatedly push the head down and let it pop back up. Water squirts out along the sides in the process, and tends to wash out grit that is making them stick. |
All times are GMT +1. The time now is 11:20 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter