That's the calculated weight of the load of block I just had delivered at 38
lbs per . What in hell have I gotten myelf into !?!
--
Snag

On Mon, 26 Oct 2015 12:23:07 -0500, "Terry Coombs"
wrote:

That's the calculated weight of the load of block I just had delivered at 38
lbs per . What in hell have I gotten myelf into !?!

Work

How many bags of cement, rebar, gloves, tools?

Oren wrote:
On Mon, 26 Oct 2015 12:23:07 -0500, "Terry Coombs"
wrote:

That's the calculated weight of the load of block I just had
delivered at 38 lbs per . What in hell have I gotten myelf into !?!

Work

How many bags of cement, rebar, gloves, tools?

I had 3 bags of typw S delivered , should be enough to know how much more
I'll need . Also got 10 pieces of #3 rebar , that should be enough . I'll be
picking up a bigger trowel , stuff to make a mortar board , odds and ends .
I\ve done a little brick work , this is my first rodeo with blocks . One
thing I've already figured out , my mortar is going to have to be pretty
stiff and I'm going to have to figure out some removeable spacers to keep
the blocks from settling as the mortar sets up . That first course has *GOT*
to be right or everything above will be crap .

--
Snag

On Mon, 26 Oct 2015 13:09:42 -0500, "Terry Coombs"
wrote:

Oren wrote:
On Mon, 26 Oct 2015 12:23:07 -0500, "Terry Coombs"
wrote:

That's the calculated weight of the load of block I just had
delivered at 38 lbs per . What in hell have I gotten myelf into !?!

Work

How many bags of cement, rebar, gloves, tools?

I had 3 bags of typw S delivered , should be enough to know how much more
I'll need . Also got 10 pieces of #3 rebar , that should be enough . I'll be
picking up a bigger trowel , stuff to make a mortar board , odds and ends .
I\ve done a little brick work , this is my first rodeo with blocks . One
thing I've already figured out , my mortar is going to have to be pretty
stiff and I'm going to have to figure out some removeable spacers to keep
the blocks from settling as the mortar sets up . That first course has *GOT*
to be right or everything above will be crap .

Yep. the corners (square) and first course are critical. Usually set
up a day or so ahead before you continue up. Don't forget a mason's
line, chalk line, mason's hammer, etc.

Tips for your rodeo:

http://www.masonryforlife.com/HowToBasics.htm

"Oren" wrote in message
...
On Mon, 26 Oct 2015 13:09:42 -0500, "Terry Coombs"
wrote:

Oren wrote:
On Mon, 26 Oct 2015 12:23:07 -0500, "Terry Coombs"
wrote:

That's the calculated weight of the load of block I just had
delivered at 38 lbs per . What in hell have I gotten myelf into !?!

Work

How many bags of cement, rebar, gloves, tools?

I had 3 bags of typw S delivered , should be enough to know how much more
I'll need . Also got 10 pieces of #3 rebar , that should be enough . I'll
be
picking up a bigger trowel , stuff to make a mortar board , odds and ends
.
I\ve done a little brick work , this is my first rodeo with blocks . One
thing I've already figured out , my mortar is going to have to be pretty
stiff and I'm going to have to figure out some removeable spacers to keep
the blocks from settling as the mortar sets up . That first course has
*GOT*
to be right or everything above will be crap .

Yep. the corners (square) and first course are critical. Usually set
up a day or so ahead before you continue up. Don't forget a mason's
line, chalk line, mason's hammer, etc.

Tips for your rodeo:

http://www.masonryforlife.com/HowToBasics.htm

Excellent link , thank you .
--
Snag



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

On Mon, 26 Oct 2015 13:09:42 -0500, "Terry Coombs"
wrote:

Oren wrote:
On Mon, 26 Oct 2015 12:23:07 -0500, "Terry Coombs"
wrote:

That's the calculated weight of the load of block I just had
delivered at 38 lbs per . What in hell have I gotten myelf into !?!

Work

How many bags of cement, rebar, gloves, tools?

I had 3 bags of typw S delivered , should be enough to know how much more
I'll need . Also got 10 pieces of #3 rebar , that should be enough . I'll be
picking up a bigger trowel , stuff to make a mortar board , odds and ends .
I\ve done a little brick work , this is my first rodeo with blocks . One
thing I've already figured out , my mortar is going to have to be pretty
stiff and I'm going to have to figure out some removeable spacers to keep
the blocks from settling as the mortar sets up . That first course has *GOT*
to be right or everything above will be crap .

You are right, setting the first course and the piers at the corners
is the trick. "Laying block to the line" down the middle of the wall
is the easy part.

On 10/26/2015 10:23 AM, Terry Coombs wrote:
That's the calculated weight of the load of block I just had delivered at 38
lbs per . What in hell have I gotten myelf into !?!

Yikes! Hopefully, it was dropped where you *need* it! We had 4800# of
ceramic tile delivered and they wouldn't come up the (short) driveway.
Moving it from the curb to the back porch in boxes of 9 or 10 tiles at
a time took a fair bit of time and was brutal on the back!

Don Y wrote:
On 10/26/2015 10:23 AM, Terry Coombs wrote:
That's the calculated weight of the load of block I just had
delivered at 38 lbs per . What in hell have I gotten myelf into !?!

Yikes! Hopefully, it was dropped where you *need* it! We had 4800#
of ceramic tile delivered and they wouldn't come up the (short)
driveway. Moving it from the curb to the back porch in boxes of 9 or
10 tiles at a time took a fair bit of time and was brutal on the back!

I wish we could have gotten it where I need it ! I'll be the next week
moving it down the hill to the construction site , about 50 at a time in the
trailer . That's OK though , I think the slab needs that week of cure time

--
Snag

On Mon, 26 Oct 2015 14:57:31 -0500, "Terry Coombs"
wrote:

I wish we could have gotten it where I need it ! I'll be the next week
moving it down the hill to the construction site , about 50 at a time in the
trailer . That's OK though , I think the slab needs that week of cure time

Are you keeping the slab damp while helping it cure? Covered in
visqueen maybe. The guys that poured the driveway here screwed the
pooch. Because I was a second owner of the house I could not have them
do a do-over, but some neighbors qualified.

Oren wrote:
On Mon, 26 Oct 2015 14:57:31 -0500, "Terry Coombs"
wrote:

I wish we could have gotten it where I need it ! I'll be the next
week moving it down the hill to the construction site , about 50 at
a time in the trailer . That's OK though , I think the slab needs
that week of cure time

Are you keeping the slab damp while helping it cure? Covered in
visqueen maybe. The guys that poured the driveway here screwed the
pooch. Because I was a second owner of the house I could not have them
do a do-over, but some neighbors qualified.

Yup , been spraying it a couple-three times a day . We've had reasonably
cool weather , rained the last 3 days .
I've got the first 70 blocks on my utility trailer , ready to pull down
there with the truck . At least I got that part figured out .
--
Snag

On Mon, 26 Oct 2015 16:14:10 -0500, "Terry Coombs"
wrote:

Are you keeping the slab damp while helping it cure? Covered in
visqueen maybe. The guys that poured the driveway here screwed the
pooch. Because I was a second owner of the house I could not have them
do a do-over, but some neighbors qualified.

Yup , been spraying it a couple-three times a day . We've had reasonably
cool weather , rained the last 3 days .
I've got the first 70 blocks on my utility trailer , ready to pull down
there with the truck . At least I got that part figured out .

Good deal. At the first corners course use the 3-4-5 method to square
for the 90º corner and pop a chalk line. (6-8-10 -- 12-16-20, etc.)

Basic:

http://www.wikihow.com/Use-the-3-4-5-Rule-to-Build-Square-Corners

On 10/26/2015 12:57 PM, Terry Coombs wrote:
Don Y wrote:
On 10/26/2015 10:23 AM, Terry Coombs wrote:
That's the calculated weight of the load of block I just had
delivered at 38 lbs per . What in hell have I gotten myelf into !?!

Yikes! Hopefully, it was dropped where you *need* it! We had 4800#
of ceramic tile delivered and they wouldn't come up the (short)
driveway. Moving it from the curb to the back porch in boxes of 9 or
10 tiles at a time took a fair bit of time and was brutal on the back!

I wish we could have gotten it where I need it ! I'll be the next week
moving it down the hill to the construction site , about 50 at a time in the
trailer . That's OK though , I think the slab needs that week of cure time

Well, at least you'll have a trailer! When we moved the tile, it
had to go *through* the house. So, most of it got hand-carried,
a box (9 tiles?) at a time. (no tolerance for breakage since
we had purchased the entire end of the lot!)

On 10/26/2015 12:23 PM, Terry Coombs wrote:
That's the calculated weight of the load of block I just had delivered at 38
lbs per . What in hell have I gotten myelf into !?!




Make it easy on yourself and only carry 500# at a time.

On Mon, 26 Oct 2015 13:24:51 -0500, philo wrote:

Make it easy on yourself and only carry 500# at a time.

"A standard gray 8-inch-by-8-inch-by-16-inch cinder block weighs about
37 pounds." Back in the day, I could only carry four at a time. I was
a worn out young man by days end

On 2015-10-26 2:36 PM, Oren wrote:
On Mon, 26 Oct 2015 13:24:51 -0500, philo wrote:

Make it easy on yourself and only carry 500# at a time.

"A standard gray 8-inch-by-8-inch-by-16-inch cinder block weighs about
37 pounds." Back in the day, I could only carry four at a time. I was
a worn out young man by days end

Got a wheel barrow, or garden cart, we aren't as young as we used to be.

--
Froz...

Quando omni flunkus, moritati

On Mon, 26 Oct 2015 15:23:16 -0400, FrozenNorth
wrote:

"A standard gray 8-inch-by-8-inch-by-16-inch cinder block weighs about
37 pounds." Back in the day, I could only carry four at a time. I was
a worn out young man by days end

Got a wheel barrow, or garden cart, we aren't as young as we used to be.

Hard to roll a cart or wheel barrow up each flight of stairs as you
work on a 4-5 story building being built. I carried four blocks up and
the other laziest carried two. Sat down with the boss late in the
project and told him why I quit. He was upset I was leaving. Heck, he
could have used mechanical means to lift the blocks. Working on
ground level is rather easy.

On 10/26/2015 01:36 PM, Oren wrote:
On Mon, 26 Oct 2015 13:24:51 -0500, philo wrote:

Make it easy on yourself and only carry 500# at a time.

"A standard gray 8-inch-by-8-inch-by-16-inch cinder block weighs about
37 pounds." Back in the day, I could only carry four at a time. I was
a worn out young man by days end




Well...I still can haul 170# up and down several flights of stairs many
times a day.


Myself.

On Mon, 26 Oct 2015 16:26:59 -0500, philo wrote:

On 10/26/2015 01:36 PM, Oren wrote:
On Mon, 26 Oct 2015 13:24:51 -0500, philo wrote:

Make it easy on yourself and only carry 500# at a time.

"A standard gray 8-inch-by-8-inch-by-16-inch cinder block weighs about
37 pounds." Back in the day, I could only carry four at a time. I was
a worn out young man by days end

Well...I still can haul 170# up and down several flights of stairs many
times a day.

Myself.

How many blocks added to that skinny frame you have

On 10/26/2015 04:50 PM, Oren wrote:
On Mon, 26 Oct 2015 16:26:59 -0500, philo wrote:

On 10/26/2015 01:36 PM, Oren wrote:
On Mon, 26 Oct 2015 13:24:51 -0500, philo wrote:

Make it easy on yourself and only carry 500# at a time.

"A standard gray 8-inch-by-8-inch-by-16-inch cinder block weighs about
37 pounds." Back in the day, I could only carry four at a time. I was
a worn out young man by days end

Well...I still can haul 170# up and down several flights of stairs many
times a day.

Myself.

How many blocks added to that skinny frame you have




I am not skinny....but I've only gained about ten pounds since the day I
got out of the Army 45 years ago.

Terry Coombs posted for all of us...



That's the calculated weight of the load of block I just had delivered at 38
lbs per . What in hell have I gotten myelf into !?!

Muscle pain; ones you didn't even know you had, back pain, scarred hands,
blocks dropped on fingers, making right angle corners, a mess, mud, crappy
clothes, itchy ass that can't be scratched.

--
Tekkie

Tekkie® writes:

Terry Coombs posted for all of us...

That's the calculated weight of the load of block I just had delivered at 38
lbs per . What in hell have I gotten myelf into !?!

Muscle pain; ones you didn't even know you had, back pain, scarred hands,
blocks dropped on fingers, making right angle corners, a mess, mud, crappy
clothes, itchy ass that can't be scratched.

Bull.

I once moved 13K lbs of just pavers.
A lot more of other kinds of rock, sand, cement.
I was around 55 at the time.

Permanently cured any back pain issues I was having.

What doesn't kill you makes you stronger.

--
Dan Espen

On Mon, 26 Oct 2015 12:23:07 -0500, "Terry Coombs"
wrote:

That's the calculated weight of the load of block I just had delivered at 38
lbs per . What in hell have I gotten myelf into !?!

I am looking at a project where I will be moving about 3 yards of
gravel and 6 or 7 yards of dirt with a wheel barrow. I may get a
machine tho. The problem is if I can actually get it into the place
where the work is.

On 10/26/2015 1:23 PM, Terry Coombs wrote:
That's the calculated weight of the load of block I just had delivered at 38
lbs per . What in hell have I gotten myelf into !?!


Had trees down in back between me and new neighbor.

We split the cost of cutting them down and removing branches and small
stuff and I told him he could keep all the firewood.

That's about the weight of the wood he got and its all downhill.

At first overwhelmed he later realized he'll get it split and stacked
with time eventually.

On Monday, October 26, 2015 at 1:23:14 PM UTC-4, Terry Coombs wrote:
That's the calculated weight of the load of block I just had delivered at 38
lbs per . What in hell have I gotten myelf into !?!
--
Snag

This is nowhere close to your weight issue, but I ordered 4 rotors and pads
for my Ody, with an expected delivery of last Saturday. On Saturday morning
I raised the van up on jack stands and cribbing and proceeded to take the
brakes apart.

I had just pulled the last rotor when the FedEx driver came up the street.
He was laughing when he got to my house and said "Now I know why these
boxes are so darn heavy!"

I guess 36# boxes are at the high end of their normal package weight.

Good luck with your project!

"DerbyDad03" wrote in message
...
I had just pulled the last rotor when the FedEx driver came up the street.
He was laughing when he got to my house and said "Now I know why these
boxes are so darn heavy!"

I guess 36# boxes are at the high end of their normal package weight.


I bet the UPS man wondered what was in a box that was about 2 feet square
and 3 feet long that came the other day. It was a piece of electronic test
gear that weighs around 70 lb I ordered off ebay.

I think at one time either 70 or 80 lb was their limit, but may be double
that now.

On Mon, 26 Oct 2015 18:00:23 -0400, "Ralph Mowery"
wrote:


"DerbyDad03" wrote in message
...
I had just pulled the last rotor when the FedEx driver came up the street.
He was laughing when he got to my house and said "Now I know why these
boxes are so darn heavy!"

I guess 36# boxes are at the high end of their normal package weight.


I bet the UPS man wondered what was in a box that was about 2 feet square
and 3 feet long that came the other day. It was a piece of electronic test
gear that weighs around 70 lb I ordered off ebay.

I think at one time either 70 or 80 lb was their limit, but may be double
that now.


The way I understand it the "regular" drivers will do up to 70# and
they will do up to 150# (they send a different truck with 2 guys).
Beyond that you are in the "freight" category. That is scary
expensive. (hundreds for a lift gate truck)

"Terry Coombs" wrote in message
...
That's the calculated weight of the load of block I just had delivered at
38 lbs per . What in hell have I gotten myelf into !?!
--
Snag



A couple of years ago I ordered a tandem load of gravel fill for a turning
leg that I was building off my driveway, I got over 28,000 pounds and had to
move it all by wheelbarrow.

EXT wrote:
"Terry Coombs" wrote in message
...
That's the calculated weight of the load of block I just had
delivered at 38 lbs per . What in hell have I gotten myelf into !?!
--
Snag



A couple of years ago I ordered a tandem load of gravel fill for a
turning leg that I was building off my driveway, I got over 28,000
pounds and had to move it all by wheelbarrow.

I had 7 yards of crushed limestone delivered , I spread it out on my
driveway with my JD 317 garden tractor . Best 25 bucks I ever spent ... well
, there's a few bucks for parts , and I'm into it for a few hundred now .
With the hydraulic blade on the front and chains it also cleans our road to
the highway in winter .

--
Snag